Car Decorative Lights

This shadow ghost lights for all Maruti cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will on automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. its result is very bright at night or in dark places. There Two small magnets include in package you to place this magnet on door sill area when close the door shadow light comes close to this magnet and turn off automatically. installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area. FeaturesThe product can be installed at the body kit, chassis or another suitable place.Easy to install with 3M double-sided adhesive tape, no more trouble in making a hole.High power, high efficiency, energy-saving, no noise, no electric interface.3d style laser light of the illuminated entry systemSpecial design causes the product with strict waterproof and thermal performance, which will make sure the normal service in various harsh environments. Specification1.Powered by 3x AAA batteries 4.5V (batteries are not included)2.Output power: 3W3.Operating temperature: -40 degrees~105 degrees4.Dimensions: 6.5 x 6.5 x 1.5cm5.Special Features: Laser light,door lights,welcome lightInstall Instruction1. Install instructions about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.2. Install instruction of the shadow light: Stick the Magnet on the bottom of the Car frame. Stick the Car light on the Car door. The distance between the Magnet & Car light is about 10mm. When you close the Car door, the Magnet is at the under the face of the sensor on the Car logo light.3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light. ..

Induction Control Automatic magnet induction control with sensor sensing area, when the distance between the magnet and the sensing area is less than 2CM The Power Botton Manual switch control button on the top of the lamp body to turn the power on or off The Power Supply Use 3 Cell batteries as power supply, no need to change the original car line really non-destructive installation These shadow ghost lights for all cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. Its result is very bright at night or in dark places. There Two small magnets include in the package you place this magnet on the door sill area when you close the door shadow light comes close to this magnet and turns it off automatically. Installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area. Easy Installation Step 1 Adjust the position of the light and distance between the magnet with the light, which makes the light can automatically turn on when open the car door. Step 2 Gently stick the light on the door, stick the magnet on the threshold, we suggest you close the door when installing. Step 3 When the lamp separates from the magnet, the Light will turn on automatically, after adjusting the position well, stick the Light and magnet tightly Compatibility:-For All MG Cars, Sales Package:-2 x Ghost Light2 x Tape2 x Magnet Product Warranty:-NA..

Induction Control Automatic magnet induction control with sensor sensing area, when the distance between the magnet and the sensing area is less than 2CM The Power Botton Manual switch control button on the top of the lamp body to turn the power on or off The Power Supply Use 3 Cell batteries as power supply, no need to change the original car line really non-destructive installation These shadow ghost lights for all cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. Its result is very bright at night or in dark places. There Two small magnets include in the package you place this magnet on the door sill area when you close the door shadow light comes close to this magnet and turns it off automatically. Installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area. Easy Installation Step 1 Adjust the position of the light and distance between the magnet with the light, which makes the light can automatically turn on when open the car door. Step 2 Gently stick the light on the door, stick the magnet on the threshold, we suggest you close the door when installing. Step 3 When the lamp separates from the magnet, the Light will turn on automatically, after adjusting the position well, stick the Light and magnet tightly Compatibility:-For All MG Cars, Sales Package:-2 x Ghost Light2 x Tape2 x Magnet Product Warranty:-NA..

This shadow ghost lights for all tata cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will on automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. its result is very bright at night or in dark places. There Two small magnets include in package you to place this magnet on door sill area when close the door shadow light comes close to this magnet and turn off automatically. installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area. FeaturesThe product can be installed at the body kit, chassis or another suitable place.Easy to install with 3M double-sided adhesive tape, no more trouble in making a hole.High power, high efficiency, energy-saving, no noise, no electric interface.3d style laser light of the illuminated entry systemSpecial design causes the product with strict waterproof and thermal performance, which will make sure the normal service in various harsh environments. Specification1.Powered by 3x AAA batteries 4.5V (batteries are not included)2.Output power: 3W3.Operating temperature: -40 degrees~105 degrees4.Dimensions: 6.5 x 6.5 x 1.5cm5.Special Features: Laser light,door lights,welcome lightInstall Instruction1. Install instructions about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.2. Install instruction of the shadow light: Stick the Magnet on the bottom of the Car frame. Stick the Car light on the Car door. The distance between the Magnet & Car light is about 10mm. When you close the Car door, the Magnet is at the under the face of the sensor on the Car logo light.3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light. ..

This shadow ghost lights for all tata cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will on automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. its result is very bright at night or in dark places. There Two small magnets include in package you to place this magnet on door sill area when close the door shadow light comes close to this magnet and turn off automatically. installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area. FeaturesThe product can be installed at the body kit, chassis or another suitable place.Easy to install with 3M double-sided adhesive tape, no more trouble in making a hole.High power, high efficiency, energy-saving, no noise, no electric interface.3d style laser light of the illuminated entry systemSpecial design causes the product with strict waterproof and thermal performance, which will make sure the normal service in various harsh environments. Specification1.Powered by 3x AAA batteries 4.5V (batteries are not included)2.Output power: 3W3.Operating temperature: -40 degrees~105 degrees4.Dimensions: 6.5 x 6.5 x 1.5cm5.Special Features: Laser light,door lights,welcome lightInstall Instruction1. Install instructions about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.2. Install instruction of the shadow light: Stick the Magnet on the bottom of the Car frame. Stick the Car light on the Car door. The distance between the Magnet & Car light is about 10mm. When you close the Car door, the Magnet is at the under the face of the sensor on the Car logo light.3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light. ..

This shadow ghost lights for all tata cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will on automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. its result is very bright at night or in dark places. There Two small magnets include in package you to place this magnet on door sill area when close the door shadow light comes close to this magnet and turn off automatically. installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area. FeaturesThe product can be installed at the body kit, chassis or another suitable place.Easy to install with 3M double-sided adhesive tape, no more trouble in making a hole.High power, high efficiency, energy-saving, no noise, no electric interface.3d style laser light of the illuminated entry systemSpecial design causes the product with strict waterproof and thermal performance, which will make sure the normal service in various harsh environments. Specification1.Powered by 3x AAA batteries 4.5V (batteries are not included)2.Output power: 3W3.Operating temperature: -40 degrees~105 degrees4.Dimensions: 6.5 x 6.5 x 1.5cm5.Special Features: Laser light,door lights,welcome lightInstall Instruction1. Install instructions about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.2. Install instruction of the shadow light: Stick the Magnet on the bottom of the Car frame. Stick the Car light on the Car door. The distance between the Magnet & Car light is about 10mm. When you close the Car door, the Magnet is at the under the face of the sensor on the Car logo light.3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light. ..

This shadow ghost lights for all Toyota cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will on automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. its result is very bright at night or in dark places. There Two small magnets include in package you to place this magnet on door sill area when close the door shadow light comes close to this magnet and turn off automatically. installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area. FeaturesThe product can be installed at the body kit, chassis or another suitable place.Easy to install with 3M double-sided adhesive tape, no more trouble in making a hole.High power, high efficiency, energy-saving, no noise, no electric interface.3d style laser light of the illuminated entry systemThe special design causes the product with strict waterproof and thermal performance, which will make sure the normal service in various harsh environments. Specification1.Powered by 3x AAA batteries 4.5V (batteries are not included)2.Output power: 3W3.Operating temperature: -40 degrees~105 degrees4.Dimensions: 6.5 x 6.5 x 1.5cm5.Special Features: Laser light,door lights,welcome lightInstall Instruction1. Install instructions about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.2. Install instruction of the shadow light: Stick the Magnet on the bottom of the Car frame. Stick the Car light on the Car door. The distance between the Magnet & Car light is about 10mm. When you close the Car door, the Magnet is at the under the face of the sensor on the Car logo light.3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light. ..

This shadow ghost lights for all Toyota cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will on automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. its result is very bright at night or in dark places. There Two small magnets include in package you to place this magnet on door sill area when close the door shadow light comes close to this magnet and turn off automatically. installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area. FeaturesThe product can be installed at the body kit, chassis or another suitable place.Easy to install with 3M double-sided adhesive tape, no more trouble in making a hole.High power, high efficiency, energy-saving, no noise, no electric interface.3d style laser light of the illuminated entry systemSpecial design causes the product with strict waterproof and thermal performance, which will make sure the normal service in various harsh environments. Specification1.Powered by 3x AAA batteries 4.5V (batteries are not included)2.Output power: 3W3.Operating temperature: -40 degrees~105 degrees4.Dimensions: 6.5 x 6.5 x 1.5cm5.Special Features: Laser light,door lights,welcome lightInstall Instruction1. Install instructions about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.2. Install instruction of the shadow light: Stick the Magnet on the bottom of the Car frame. Stick the Car light on the Car door. The distance between the Magnet & Car light is about 10mm. When you close the Car door, the Magnet is at the under the face of the sensor on the Car logo light.3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light. ..

This shadow ghost lights for all Toyota cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will on automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. its result is very bright at night or in dark places. There Two small magnets include in package you to place this magnet on door sill area when close the door shadow light comes close to this magnet and turn off automatically. installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area. FeaturesThe product can be installed at the body kit, chassis or another suitable place.Easy to install with 3M double-sided adhesive tape, no more trouble in making a hole.High power, high efficiency, energy-saving, no noise, no electric interface.3d style laser light of the illuminated entry systemSpecial design causes the product with strict waterproof and thermal performance, which will make sure the normal service in various harsh environments. Specification1.Powered by 3x AAA batteries 4.5V (batteries are not included)2.Output power: 3W3.Operating temperature: -40 degrees~105 degrees4.Dimensions: 6.5 x 6.5 x 1.5cm5.Special Features: Laser light,door lights,welcome lightInstall Instruction1. Install instructions about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.2. Install instruction of the shadow light: Stick the Magnet on the bottom of the Car frame. Stick the Car light on the Car door. The distance between the Magnet & Car light is about 10mm. When you close the Car door, the Magnet is at the under the face of the sensor on the Car logo light.3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light. ..

This shadow ghost lights for all Toyota cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will on automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. its result is very bright at night or in dark places. There Two small magnets include in package you to place this magnet on door sill area when close the door shadow light comes close to this magnet and turn off automatically. installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area. FeaturesThe product can be installed at the body kit, chassis or another suitable place.Easy to install with 3M double-sided adhesive tape, no more trouble in making a hole.High power, high efficiency, energy-saving, no noise, no electric interface.3d style laser light of the illuminated entry systemSpecial design causes the product with strict waterproof and thermal performance, which will make sure the normal service in various harsh environments. Specification1.Powered by 3x AAA batteries 4.5V (batteries are not included)2.Output power: 3W3.Operating temperature: -40 degrees~105 degrees4.Dimensions: 6.5 x 6.5 x 1.5cm5.Special Features: Laser light,door lights,welcome lightInstall Instruction1. Install instructions about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.2. Install instruction of the shadow light: Stick the Magnet on the bottom of the Car frame. Stick the Car light on the Car door. The distance between the Magnet & Car light is about 10mm. When you close the Car door, the Magnet is at the under the face of the sensor on the Car logo light.3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light. ..

This shadow ghost lights for all toyota cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will on automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. its result is very bright at night or in dark places. There Two small magnets include in package you to place this magnet on door sill area when close the door shadow light comes close to this magnet and turn off automatically. installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area. FeaturesThe product can be installed at the body kit, chassis or another suitable place.Easy to install with 3M double-sided adhesive tape, no more trouble in making a hole.High power, high efficiency, energy-saving, no noise, no electric interface.3d style laser light of the illuminated entry systemSpecial design causes the product with strict waterproof and thermal performance, which will make sure the normal service in various harsh environments. Specification1.Powered by 3x AAA batteries 4.5V (batteries are not included)2.Output power: 3W3.Operating temperature: -40 degrees~105 degrees4.Dimensions: 6.5 x 6.5 x 1.5cm5.Special Features: Laser light,door lights,welcome lightInstall Instruction1. Install instructions about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.2. Install instruction of the shadow light: Stick the Magnet on the bottom of the Car frame. Stick the Car light on the Car door. The distance between the Magnet & Car light is about 10mm. When you close the Car door, the Magnet is at the under the face of the sensor on the Car logo light.3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light. ..

This shadow ghost lights for all Toyota Innova cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will on automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. its result is very bright at night or in dark places. There Two small magnets include in package you to place this magnet on door sill area when close the door shadow light comes close to this magnet and turn off automatically. installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area. FeaturesThe product can be installed at the body kit, chassis or another suitable place.Easy to install with 3M double-sided adhesive tape, no more trouble in making a hole.High power, high efficiency, energy-saving, no noise, no electric interface.3d style laser light of the illuminated entry systemSpecial design causes the product with strict waterproof and thermal performance, which will make sure the normal service in various harsh environments. Specification1.Powered by 3x AAA batteries 4.5V (batteries are not included)2.Output power: 3W3.Operating temperature: -40 degrees~105 degrees4.Dimensions: 6.5 x 6.5 x 1.5cm5.Special Features: Laser light,door lights,welcome lightInstall Instruction1. Install instructions about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.2. Install instruction of the shadow light: Stick the Magnet on the bottom of the Car frame. Stick the Car light on the Car door. The distance between the Magnet & Car light is about 10mm. When you close the Car door, the Magnet is at the under the face of the sensor on the Car logo light.3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light. ..

This shadow ghost lights for all Toyota cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will on automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. its result is very bright at night or in dark places. There Two small magnets include in package you to place this magnet on door sill area when close the door shadow light comes close to this magnet and turn off automatically. installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area. FeaturesThe product can be installed at the body kit, chassis or another suitable place.Easy to install with 3M double-sided adhesive tape, no more trouble in making a hole.High power, high efficiency, energy-saving, no noise, no electric interface.3d style laser light of the illuminated entry systemSpecial design causes the product with strict waterproof and thermal performance, which will make sure the normal service in various harsh environments. Specification1.Powered by 3x AAA batteries 4.5V (batteries are not included)2.Output power: 3W3.Operating temperature: -40 degrees~105 degrees4.Dimensions: 6.5 x 6.5 x 1.5cm5.Special Features: Laser light,door lights,welcome lightInstall Instruction1. Install instructions about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.2. Install instruction of the shadow light: Stick the Magnet on the bottom of the Car frame. Stick the Car light on the Car door. The distance between the Magnet & Car light is about 10mm. When you close the Car door, the Magnet is at the under the face of the sensor on the Car logo light.3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light. ..

Induction Control Automatic magnet induction control with sensor sensing area, when the distance between the magnet and the sensing area is less than 2CM The Power Botton Manual switch control button on the top of the lamp body to turn the power on or off The Power Supply Use 3 Cell batteries as power supply, no need to change the original car line really non-destructive installation These shadow ghost lights for all cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. Its result is very bright at night or in dark places. There Two small magnets include in the package you place this magnet on the door sill area when you close the door shadow light comes close to this magnet and turns it off automatically. Installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area. Easy Installation Step 1 Adjust the position of the light and distance between the magnet with the light, which makes the light can automatically turn on when open the car door. Step 2 Gently stick the light on the door, stick the magnet on the threshold, we suggest you close the door when installing. Step 3 When the lamp separates from the magnet, the Light will turn on automatically, after adjusting the position well, stick the Light and magnet tightly Compatibility:-For Volkswagen All Cars, Sales Package:-2 x Ghost Light2 x Tape2 x Magnet Product Warranty:-NA..

Induction Control Automatic magnet induction control with sensor sensing area, when the distance between the magnet and the sensing area is less than 2CM The Power Botton Manual switch control button on the top of the lamp body to turn the power on or off The Power Supply Use 3 Cell batteries as power supply, no need to change the original car line really non-destructive installation These shadow ghost lights for all cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. Its result is very bright at night or in dark places. There Two small magnets include in the package you place this magnet on the door sill area when you close the door shadow light comes close to this magnet and turns it off automatically. Installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area. Easy Installation Step 1 Adjust the position of the light and distance between the magnet with the light, which makes the light can automatically turn on when open the car door. Step 2 Gently stick the light on the door, stick the magnet on the threshold, we suggest you close the door when installing. Step 3 When the lamp separates from the magnet, the Light will turn on automatically, after adjusting the position well, stick the Light and magnet tightly Compatibility:-For Volkswagen All Cars, Sales Package:-2 x Ghost Light2 x Tape2 x Magnet Product Warranty:-NA..