Carhatke

Optimize for All Cars The luminous point and the position of the chuck are the same height as the halogen lamp, perfect replacement. Great Visibility Adopting car-grade G-XP chip, 360-degree light emission, without any dark spots and blind areas, making driving safer. Minimization The Temperature Water Test to prove the manufacturing quality, you can put the LED bulb into the water and the LED light will keep lighting. Dual Heat Dissipation System The bulb is equipped with a fan, heat sink, liquid cooling tube, multiple heat dissipation, extend the life more 50,000 hours. Hydraulic Control Built-in decoding chip, greatly reducing the problem of flicker, error message and radio interference. Advanced Cooling Fan Imported COB lighting source low power consuming, Long life-span and Powerful anti-static performance If you expect a quality LED headlight bulb that is combined with high-quality, super brightness of 130 Watts and efficient heat dissipation, if you are worried about the error code when installing the bulb. Featuring with its outstanding triple cooling system and a high number of 130W 13,600LM . Carhatke LED headlight bulb provides you with a brighter light, better heat dissipation, longer lifespan and 99% compatibility. Canbus-Ready Design With an upgraded intelligent Canbus design, This Carhatke LED bulb is compatible with 99% of vehicles with no radio interference, no flicking or error code, preventing over-voltage and over-current protection function. Perfect Light Beam Pattern The flip chip inside the LED car bulb is perfectly positioned to fix the housing in the correct spot. This ensures the best light beam pattern with a perfect 45°cut-off line for low beam and super focused light for high beam. You can also rotate the light beam pattern with a 360°retainer. There’s no dark spot, no issue with blinding oncoming traffic. Led Specs:-Save Power: Consumers Only 130 Watts(65 Each)Color: 6000K Cool WhiteOperating Life: >30000hrsOperating Temperature: -40C ~+90CInput Power: 130W +10%Operating Voltage: DC 120-24VLuminous Flux: 13600LMIP Rate: IP68Light Source Model: G-XP x3 CustomizedHeat Dissipation: Aviation Aluminum 6063+Red copper+ Dual Heat Coducting Tubes Quick Specs:-Long Span LifeInstant StartHighest Light EfficiencyRain ResistantLow BeamHigh BeamImported COB LED Compatible:-H1H4H19H7H8/H11/H16H27/880/881HB4/9006HB3/90059012 Socket Types:-H1, H4, H7, H8/H11/H16, HB3/9005, HB4/ 9006, 9012, H27 Sales Package:-2x Light Bulbs Product Warranty:-15 Month Warranty By Carhatke.comWarranty:15 Month complete replacement warranty by carhatke.com if you facing any issue with led bulb just call us on our register contact number and we will replace your bulb within 7 Days...

The combo of iPH Projector with Carhatke 130W led that outperforms the stock headlights of the car. These fog lights come with high & low beam functions and are meant for those people who are looking for high-intensity lighting without affecting the visibility of oncoming drivers. Your search for the best intensity yet road legal fog lights ends here.Life Span of iPH CAR Projector Fog Lamp:Carhatke 130W Led is used in iPHCAR 3.0-inch Bi-Xenon Projector Fog Lamp, hence, it can deliver better performance for approx. 3 to 4 years, on driving 3-6 hours every day.About the Projector:Brand: iPHCAR, a well-known brand globallyMaterial: Shockproof Metal Housing for better lifespanQuality: Waterproof, Shockproof, DurableLens Size: 3.0 inch.NA WarrantyAbout 130W Led inside:True  130W  Super Bright Led.Max Temperature 87.6CHydraulic ControlDouble Tube Heat Dissipation6000K Pure WhiteLuminous Flux: 13600LMOptimize For Car and Bike15 Month  WarrantyCompatibility:Direct fit for all Cars by Suzuki or similar cars. (eg. Swift, Baleno, Wagon-R, Alto new, Ignis, Ciaz, Ertiga, Brezza, S-cross, XL6,  Celerio, Alto 800 etc.)Direct fit for other cars with 3 inches round fog lamp (eg. Ford Figo, Ecosport, Nexon, Compass, Amaze, Etios, City, Duster, etc. )For other cars, little alterations required with the clamp to get it fitted.Carhatke will support with fitment as well.Installation:Professional installation recommendedDirect connection with the fog lamp wire coming from the master wiring harness.For high beam, the high beam/ solenoid wires to be connected with headlight high beam wires.Or you may use a separate switch for the fog lamp high beam.Insulate every connecting point properly to avoid any technical or physical damage.Package Includes:2 x iPHCAR Projector Fog Lamp2 x Carhatke 130W Led Bulbs2 x Brackets2 x BallastsMounting ScrewsFog Light Wiring Kits & Couplers (Addon)Warranty:Carhatke 130W LED Comes with 15 Month Warranty.Note:1. If you want to keep the Wiring of this kit Separate from the Car’s electricals, simply use the Kit with Relay Harness...

Waterproof, top quality metal made 3D sticker, 100% brand new, looks creative and cool. With strong 3M adhesive tape, easy to install, removable.Installation: You Must Make Sure You Will Install Emblem On a Flat Position Because The Emblem Back is Flat, Do Not Paste on Curve Surface Adhesive Tape is on Back, Easy to Decorate Your Car. Just Clean the Surface of Your Car Before Pasting Satisfaction GuaranteedPackage Content: 1 Pc Toyota Racing Development TRD Metal Badge Emblem..

Waterproof, top quality metal made 3D sticker, 100% brand new, looks creative and cool. With strong 3M adhesive tape, easy to install, removable.Installation: You Must Make Sure You Will Install Emblem On a Flat Position Because The Emblem Back is Flat, Do Not Paste on Curve Surface Adhesive Tape is on Back, Easy to Decorate Your Car. Just Clean the Surface of Your Car Before Pasting Satisfaction GuaranteedPackage Content: 1 Pc Toyota Racing Development TRD Metal Badge Emblem..

These car seats cover is made with imported Australian PU fabric to ensure the best quality result. The advanced machine used to stitch and finish. These Australian PU fabric seat covers made on the original pattern size will be 100% perfectly match to the  Mahindra XUV 500  2011-2018. These seat covers are fully bucketed to ensure getting the perfect fitting. The front seat cover will be fully covered from the backside of the seats and also have a pocket where you can keep important things like documents, mobile charger and etc. Rear seats also will be fully covered from the backside. This seat cover comes in a complete set with a front seat cover, rear seat cover, and headrest (if applicable in the car).  Seats cover 100% Waterproof highly durable. Custom Fit Seat Covers 100% custom fit seat cover for different makes and models, Our tailor-made seat cover according to your car seat side for best fitting. Protection that Works If you’re looking for a quick affordable way to breathe new life into the interior of your car then look no further Bucket Fitting Seat Cover Bucket Fitting Seat Cover gives your seat cover an elegant and premium look, our tailer is always made for 100% side-by-side fitting. Fashion design The unique diamond pattern is stylish and non-slip, High-end leather The High-End PU Leatherette is durable, and the matte texture is more advanced Delicate stitching There is no extra thread at the suture to ensure good quality Compatibility:-Mahindra XUV 500 All Models. Sales Package:-Front & Rear Seat CoverSet of 2 PillowSet of 2 Neck Rest Product Warranty:-1 Year Fabric Warranty.Installation:-We did not provide the installation for any Car seat cover, we would like to recommend getting the installation from a professional as it saves your time, and also you will get the best result of the fitting. Note:-Images shown are just for illustration of the design and color of the seat covers and may not illustrate the exact seating arrangement of the car. Actual seat covers will be the perfect bucket fit for the seating arrangement for the above-mentioned car model. Once you place the order you will be getting a call from our office to verify your order, vehicle color, and all details.  After your confirmation, we take 2-3 days for making a seat cover for your car model, ..

These car seats cover is made with imported Australian PU fabric to ensure the best quality result. The advanced machine used to stitch and finish. These Australian PU fabric seat covers made on the original pattern size will be 100% perfectly match to the  Mahindra XUV 500  2011-2018. These seat covers are fully bucketed to ensure getting the perfect fitting. The front seat cover will be fully covered from the backside of the seats and also have a pocket where you can keep important things like documents, mobile charger and etc. Rear seats also will be fully covered from the backside. This seat cover comes in a complete set with a front seat cover, rear seat cover, and headrest (if applicable in the car).  Seats cover 100% Waterproof highly durable. Custom Fit Seat Covers 100% custom fit seat cover for different makes and models, Our tailor-made seat cover according to your car seat side for best fitting. Protection that Works If you’re looking for a quick affordable way to breathe new life into the interior of your car then look no further Bucket Fitting Seat Cover Bucket Fitting Seat Cover gives your seat cover an elegant and premium look, our tailer is always made for 100% side-by-side fitting. Fashion design The unique diamond pattern is stylish and non-slip, High-end leather The High-End PU Leatherette is durable, and the matte texture is more advanced Delicate stitching There is no extra thread at the suture to ensure good quality Compatibility:- Mahindra XUV500  2018 Onward. Sales Package:-Front & Rear Seat CoverSet of 2 PillowSet of 2 Neck Rest Product Warranty:-1 Year Fabric Warranty.Installation:-We did not provide the installation for any Car seat cover, we would like to recommend getting the installation from a professional as it saves your time, and also you will get the best result of the fitting. Note:-Images shown are just for illustration of the design and color of the seat covers and may not illustrate the exact seating arrangement of the car. Actual seat covers will be the perfect bucket fit for the seating arrangement for the above-mentioned car model. Once you place the order you will be getting a call from our office to verify your order, vehicle color, and all details.  After your confirmation, we take 2-3 days for making a seat cover for your car model, ..