Car Decorative Lights

Audi Entry Door Welcome Shadow Ghost Light (Audi Logo)..

BMW Entry Door Welcome Shadow Ghost Light (BMW Logo)..

These shadow ghost lights are for all Ford cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will on automatically and create a shadow of the Logo on the surface. This product is completely wireless and specially designed for Car modification for making your vehicle fancy and give more fun to the driver. its result is very bright at night or in dark places. There are two small magnets included in the package you to place this magnet on the door sill area when closing the door shadow light comes close to this magnet and turns off automatically. installation is very easy no need for wiring and drilling on the Car body, just stick the light on the Car door panel at the bottom side and stick the magnet on the Car door frame sill area.Compatibility: Endeavour, Freestyle, Figo, Figo Aspire, Ecosport.FeaturesThe product can be installed in the body kit, chassis, or another suitable place.Easy to install with 3M double-sided adhesive tape, no more trouble in making a hole.High power, high efficiency, energy-saving, no noise, no electric interface.3d style laser light of the illuminated entry systemThe special design causes the product with strict waterproof and thermal performance, which will make sure normal service in various harsh environments. Specification1. Powered by 3x AAA batteries 4.5V (batteries are not included)2. Output power: 3W3. Operating temperature: -40 degrees~105 degrees4.Dimensions: 6.5 x 6.5 x 1.5cm5. Special Features: Laser light, door lights, welcome lightInstall Instruction1. Install instructions about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.2. Install instructions for the shadow light: Stick the Magnet on the bottom of the Car frame. Stick the Car light on the Car door. The distance between the Magnet & Car light is about 10mm. When you close the Car door, the Magnet is under the face of the sensor on the Car logo light.3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light. ..

Induction Control Automatic magnet induction control with sensor sensing area, when the distance between the magnet and the sensing area is less than 2CM The Power Botton Manual switch control button on the top of the lamp body to turn the power on or off The Power Supply Use 3 Cell batteries as power supply, no need to change the original car line really non-destructive installation These shadow ghost lights are for all cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will automatically create a shadow of the Logo on the surface. This product is completely wireless and specially designed for Car modification for making your vehicle fancy and give more fun to the driver. Its result is very bright at night or in dark places. There are two small magnets included in the package you place this magnet on the door sill area when you close the door shadow light comes close to this magnet and turns it off automatically. Installation is very easy no need for wiring and drilling on the Car body, just stick the light on the Car door panel at the bottom side and stick the magnet on the Car door frame sill area. Easy Installation Step 1 Adjust the position of the light and the distance between the magnet with the light, which makes the light can automatically turn on when opening the car door. Step 2 Gently stick the light on the door, and stick the magnet on the threshold, we suggest you close the door when installing. Step 3 When the lamp separates from the magnet, the Light will turn on automatically, after adjusting the position well, stick the Light and magnet tightly Compatibility:-For All Honda Cars,City, Civic, BrioAmaze, AccordCRV, BRV, Mobilio,  Sales Package:-2 x Ghost Light2 x Tape2 x Magnet Product Warranty:-NA..

This shadow ghost lights for all Hyundai cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will on automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. its result is very bright at night or in dark places. There Two small magnets include in package you to place this magnet on door sill area when close the door shadow light comes close to this magnet and turn off automatically. installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area.Compatibility: i10, i10 Grand, i20, i20 Elite, Verna, Elantra, Sonata, Creta, Santa-Fe, Tucson, Aura, Nios, Venue, Alcazar. FeaturesThe product can be installed at the body kit, chassis or another suitable place.Easy to install with 3M double-sided adhesive tape, no more trouble in making a hole.High power, high efficiency, energy-saving, no noise, no electric interface.3d style laser light of the illuminated entry systemSpecial design causes the product with strict waterproof and thermal performance, which will make sure the normal service in various harsh environments. Specification1.Powered by 3x AAA batteries 4.5V (batteries are not included)2.Output power: 3W3.Operating temperature: -40 degrees~105 degrees4.Dimensions: 6.5 x 6.5 x 1.5cm5.Special Features: Laser light,door lights,welcome lightInstall Instruction1. Install instructions about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.2. Install instruction of the shadow light: Stick the Magnet on the bottom of the Car frame. Stick the Car light on the Car door. The distance between the Magnet & Car light is about 10mm. When you close the Car door, the Magnet is at the under the face of the sensor on the Car logo light.3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light. ..

Induction Control Automatic magnet induction control with sensor sensing area, when the distance between the magnet and the sensing area is less than 2CM The Power Botton Manual switch control button on the top of the lamp body to turn the power on or off The Power Supply Use 3 Cell batteries as power supply, no need to change the original car line really non-destructive installation These shadow ghost lights are for all cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will automatically create a shadow of the Logo on the surface. This product is completely wireless and specially designed for Car modification for making your vehicle fancy and give it more fun for the driver. Its result is very bright at night or in dark places. There are two small magnets included in the package you place this magnet on the door sill area when you close the door shadow light comes close to this magnet and turns it off automatically. Installation is very easy no need for wiring and drilling on the Car body, just stick the light on the Car door panel at the bottom side and stick the magnet on the Car door frame sill area. Easy Installation Step 1 Adjust the position of the light and the distance between the magnet with the light, which makes the light can automatically turn on when opening the car door. Step 2 Gently stick the light on the door, stick the magnet on the threshold, we suggest you close the door when installing. Step 3 When the lamp separates from the magnet, the Light will turn on automatically, after adjusting the position well, stick the Light and magnet tightly Compatibility:-For All Cars,Sonet, SeltosCarnival, Carens Sales Package:-2 x Ghost Light2 x Tape2 x Magnet Product Warranty:-NA..

Land Rover Entry Door Welcome Shadow Ghost Light (Land Rover Logo)..

This shadow ghost lights for all Maruti cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will on automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. its result is very bright at night or in dark places. There Two small magnets include in package you to place this magnet on door sill area when close the door shadow light comes close to this magnet and turn off automatically. installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area.Compatibility: Maruti 800, alto, alto k10, alto 800, zen, gypsy, jimmy, ciaz, brezza, grand vitara, swift, swift dzire, dzire, baleno, ertiga, xl6, ignis, fronx, sx4, ritz FeaturesThe product can be installed in the body kit, chassis, or another suitable place.Easy to install with 3M double-sided adhesive tape, no more trouble in making a hole.High power, high efficiency, energy-saving, no noise, no electric interface.3d style laser light of the illuminated entry systemThe special design causes the product with strict waterproof and thermal performance, which will make sure normal service in various harsh environments. Specification1.Powered by 3x AAA batteries 4.5V (batteries are not included)2.Output power: 3W3.Operating temperature: -40 degrees~105 degrees4.Dimensions: 6.5 x 6.5 x 1.5cm5.Special Features: Laser light,door lights,welcome lightInstall Instruction1. Install instructions about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.2. Install instruction of the shadow light: Stick the Magnet on the bottom of the Car frame. Stick the Car light on the Car door. The distance between the Magnet & Car light is about 10mm. When you close the Car door, the Magnet is at the under the face of the sensor on the Car logo light.3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light. ..

Maruti Suzuki Entry Door Welcome Shadow Ghost Light (Suzuki Logo)Compatible withMaruti Suzuki Brezza 2022 Onwards 2nd Generation ModelMaruti Suzuki Baleno 2022 Onwards 2nd Generation  Model..

Mercedes-Benz CL Series Entry Door Welcome Shadow Ghost Light (Mercedes-Benz Logo)..

Mercedes-Benz GL Series Entry Door Welcome Shadow Ghost Light (Mercedes-Benz Logo)..

Induction Control Automatic magnet induction control with sensor sensing area, when the distance between the magnet and the sensing area is less than 2CM The Power Botton Manual switch control button on the top of the lamp body to turn the power on or off The Power Supply Use 3 Cell batteries as power supply, no need to change the original car line really non-destructive installation These shadow ghost lights for all cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. Its result is very bright at night or in dark places. There Two small magnets include in the package you place this magnet on the door sill area when you close the door shadow light comes close to this magnet and turns it off automatically. Installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area. Easy Installation Step 1 Adjust the position of the light and the distance between the magnet with the light, which makes the light can automatically turn on when opening the car door. Step 2 Gently stick the light on the door, and stick the magnet on the threshold, we suggest you close the door when installing. Step 3 When the lamp separates from the magnet, the Light will turn on automatically, after adjusting the position well, stick the Light and magnet tightly Compatibility:-For All MG Cars,Hector, AstorZS EV, Gloster Sales Package:-2 x Ghost Light2 x Tape2 x Magnet Product Warranty:-NA..

For Lovers Enjoy the romantic atmosphere in your Car with your lover tonight. It appears infinite DIY colors with adjustable brightness/speed/pattern. App Control & 16 Million Colors The Car Interior Trim Light Strip uses a wireless “Lotus Lantern” APP for control suitable for IOS or Andriod. personalize the car interior space. Wireless RF Remote Wireless Music Remote Control enables you to change the color and adjust the brightness as you wish, also the Sound-activated Function allows you to enjoy the fun with the color changing. Light Mode:1) Sound Active Effects: The LED under car glow system is equipped with sound sensors that let the LED lights synchronized with the music beat. The LED music light strip follows the beat and adjusts flashing to fit the strength of the sound.2) Music Decoration: The Kit designed to be simple, yet also provides elegance inside the car when driving at night or enjoying music. And because it has a sound sensor, the under-car glow system synchronizes with the music beat.3) Fall Asleep Mode: The Led light will have fall asleep mode. This mode can automatically change dark brightness to provide a good sleep atmosphere.4) Brightness Color Temperature Adjustment: The LED is equipped with brightness color temperature adjustment mode. When you feel the light is dark, you can use this mode to change brightness. Easy Installation Step 1 Pass the optical fiber through the transparent tube. Put the transparent tube into the gap. Cut according to the length of the installation position. Step 2 Connect the optical fiber to the LED and tighten the screws.Hide wires and LEDs. Step 3 If apart car door: Hide it in the car door or center console and instrument panel. App Connection Steps: Step 1 Scan the QR code on the control box or search for “Lotus Lantern” in the app store. Step 2 Turn on your phone Bluetooth. Step 3 Open the APP and connect the light. Note:-1. If you face the issue of lights not connecting/working via the Bluetooth app, please troubleshoot with these two steps.2) Please open the APP and on the upper left corner, please click into the “Groups” Button (on the left of “Color” Button), there is a “Refresh” button, please click it and refresh the APP, and then it will show 1 device 1 connected. It means the connection is successful.3) If step 1 can’t solve the problem, please keep the Bluetooth and strip lights on and EXIT the APP, and then restart the APP "Lotus Lantern", and try to connect your phone again. Compatibility:-For All Cars, Sales Package:-5 in 1 RGB LED Strip Light Kit1 x Optic Fiber (236inch)1 x PVC Transparent Tube(236inch)1 x Remote Product Warranty:-1 Month..

Induction Control Automatic magnet induction control with sensor sensing area, when the distance between the magnet and the sensing area is less than 2CM The Power Botton Manual switch control button on the top of the lamp body to turn the power on or off The Power Supply Use 3 Cell batteries as power supply, no need to change the original car line really non-destructive installation These shadow ghost lights for all cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. Its result is very bright at night or in dark places. There Two small magnets include in the package you place this magnet on the door sill area when you close the door shadow light comes close to this magnet and turns it off automatically. Installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area. Easy Installation Step 1 Adjust the position of the light and the distance between the magnet with the light, which makes the light can automatically turn on when opening the car door. Step 2 Gently stick the light on the door, and stick the magnet on the threshold, we suggest you close the door when installing. Step 3 When the lamp separates from the magnet, the Light will turn on automatically, after adjusting the position well, stick the Light and magnet tightly Compatibility:-For All Renault Cars,Duster, kwid, Pulse, ScalaKiger, Triber Sales Package:-2 x Ghost Light2 x Tape2 x Magnet Product Warranty:-NA..

SpecificationsColor: Smoke Lens Amber LEDLED Type: 9 LED Built-in SMD High PowerCovers are made of high-quality ABS plastic, and won't fade from exposureDirect replacement for OEM factory stock cab marker covers. Perfect fit No leakage.Faster on/off response time and vibration resistance.High-performance LED, long lifespan, superior illumination stability.Package included:5 x Cover with Base HousingInstallation Accessories..

This shadow ghost lights for all tata cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will on automatically and create a shadow of the Logo on the surface. This product is completely wireless especially design for Car modification for making your vehicle fancy gives more fun to the driver. its result is very bright at night or in dark places. There Two small magnets include in package you to place this magnet on door sill area when close the door shadow light comes close to this magnet and turn off automatically. installation is very easy no deed to wiring and drilling on the Car body, just stick the light on Car door panel at the bottom side and stick the magnet on Car door frame sill area.Compatibility: Indica, Indigo, Vista, Manza, bolt, zest, tiago, tigor, safari, safari storm, harrier, altroz, sumo, hexa, aria, nexon, punch FeaturesThe product can be installed at the body kit, chassis or another suitable place.Easy to install with 3M double-sided adhesive tape, no more trouble in making a hole.High power, high efficiency, energy-saving, no noise, no electric interface.3d style laser light of the illuminated entry systemSpecial design causes the product with strict waterproof and thermal performance, which will make sure the normal service in various harsh environments. Specification1.Powered by 3x AAA batteries 4.5V (batteries are not included)2.Output power: 3W3.Operating temperature: -40 degrees~105 degrees4.Dimensions: 6.5 x 6.5 x 1.5cm5.Special Features: Laser light,door lights,welcome lightInstall Instruction1. Install instructions about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.2. Install instruction of the shadow light: Stick the Magnet on the bottom of the Car frame. Stick the Car light on the Car door. The distance between the Magnet & Car light is about 10mm. When you close the Car door, the Magnet is at the under the face of the sensor on the Car logo light.3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light. ..

Toyota Fortuner Entry Door Welcome Shadow Ghost Light (Fortuner Logo)Compatible withToyota Fortuner 2016 Onwards..

Toyota Innova Crysta Entry Door Welcome Shadow Ghost Light (Crysta Logo)Compatible withToyota Innova Crysta 2017 Onwards..