Ford Endeavour Accessories

Optimize for All Cars The luminous point and the position of the chuck are the same height as the halogen lamp, perfect replacement. Great Visibility Adopting car-grade G-XP chip, 360-degree light emission, without any dark spots and blind areas, making driving safer. Minimization The Temperature Water Test to prove the manufacturing quality, you can put the LED bulb into the water and the LED light will keep lighting. Dual Heat Dissipation System The bulb is equipped with a fan, heat sink, liquid cooling tube, multiple heat dissipation, extend the life more 50,000 hours. Hydraulic Control Built-in decoding chip, greatly reducing the problem of flicker, error message and radio interference. Advanced Cooling Fan Imported COB lighting source low power consuming, Long life-span and Powerful anti-static performance If you expect a quality LED headlight bulb that is combined with high-quality, super brightness of 130 Watts and efficient heat dissipation, if you are worried about the error code when installing the bulb. Featuring with its outstanding triple cooling system and a high number of 130W 13,600LM . Carhatke LED headlight bulb provides you with a brighter light, better heat dissipation, longer lifespan and 99% compatibility. Canbus-Ready Design With an upgraded intelligent Canbus design, This Carhatke LED bulb is compatible with 99% of vehicles with no radio interference, no flicking or error code, preventing over-voltage and over-current protection function. Perfect Light Beam Pattern The flip chip inside the LED car bulb is perfectly positioned to fix the housing in the correct spot. This ensures the best light beam pattern with a perfect 45°cut-off line for low beam and super focused light for high beam. You can also rotate the light beam pattern with a 360°retainer. There’s no dark spot, no issue with blinding oncoming traffic. Led Specs:-Save Power: Consumers Only 130 Watts(65 Each)Color: 6000K Cool WhiteOperating Life: >30000hrsOperating Temperature: -40C ~+90CInput Power: 130W +10%Operating Voltage: DC 120-24VLuminous Flux: 13600LMIP Rate: IP68Light Source Model: G-XP x3 CustomizedHeat Dissipation: Aviation Aluminum 6063+Red copper+ Dual Heat Coducting Tubes Quick Specs:-Long Span LifeInstant StartHighest Light EfficiencyRain ResistantLow BeamHigh BeamImported COB LED Compatible:-H1H4H19H7H8/H11/H16H27/880/881HB4/9006HB3/90059012 Socket Types:-H1, H4, H7, H8/H11/H16, HB3/9005, HB4/ 9006, 9012, H27 Sales Package:-2x Light Bulbs Product Warranty:-15 Month Warranty By Carhatke.comWarranty:15 Month complete replacement warranty by carhatke.com if you facing any issue with led bulb just call us on our register contact number and we will replace your bulb within 7 Days...

The combo of iPH Projector with Carhatke 130W led that outperforms the stock headlights of the car. These fog lights come with high & low beam functions and are meant for those people who are looking for high-intensity lighting without affecting the visibility of oncoming drivers. Your search for the best intensity yet road legal fog lights ends here.Life Span of iPH CAR Projector Fog Lamp:Carhatke 130W Led is used in iPHCAR 3.0-inch Bi-Xenon Projector Fog Lamp, hence, it can deliver better performance for approx. 3 to 4 years, on driving 3-6 hours every day.About the Projector:Brand: iPHCAR, a well-known brand globallyMaterial: Shockproof Metal Housing for better lifespanQuality: Waterproof, Shockproof, DurableLens Size: 3.0 inch.NA WarrantyAbout 130W Led inside:True  130W  Super Bright Led.Max Temperature 87.6CHydraulic ControlDouble Tube Heat Dissipation6000K Pure WhiteLuminous Flux: 13600LMOptimize For Car and Bike15 Month  WarrantyCompatibility:Direct fit for all Cars by Suzuki or similar cars. (eg. Swift, Baleno, Wagon-R, Alto new, Ignis, Ciaz, Ertiga, Brezza, S-cross, XL6,  Celerio, Alto 800 etc.)Direct fit for other cars with 3 inches round fog lamp (eg. Ford Figo, Ecosport, Nexon, Compass, Amaze, Etios, City, Duster, etc. )For other cars, little alterations required with the clamp to get it fitted.Carhatke will support with fitment as well.Installation:Professional installation recommendedDirect connection with the fog lamp wire coming from the master wiring harness.For high beam, the high beam/ solenoid wires to be connected with headlight high beam wires.Or you may use a separate switch for the fog lamp high beam.Insulate every connecting point properly to avoid any technical or physical damage.Package Includes:2 x iPHCAR Projector Fog Lamp2 x Carhatke 130W Led Bulbs2 x Brackets2 x BallastsMounting ScrewsFog Light Wiring Kits & Couplers (Addon)Warranty:Carhatke 130W LED Comes with 15 Month Warranty.Note:1. If you want to keep the Wiring of this kit Separate from the Car’s electricals, simply use the Kit with Relay Harness...

This auto mirror folding relay kit is only compatible with the Ford New Endeavour 2016-2022. after installing this relay kit your side mirror will be closed automatically whenever you lock the door and it will automatically open whenever the ignition is on in your car. You don't have to cut any wire during the installation, but you might be wiretapped that you have used for the connection to the central locking system.Attention.This product is only used if your Car model side mirror folds from the manual button inside.If your car does not have the button inside to fold and unfold the mirror don't buy it.The side mirror should be electronic for using this relay.Operation.   1. Press the remote lock mirror folding.   2. Press the remote to unlock the mirror opening.Brief Installation of instruction. Find out the original car mirror folder switch.Separate plug to original car switch, use product's male plug connects to switch plug and product's female plug connect to wrings group.According to the following picture connect the line.How to find out the center lock motor positive line.Searching the wire at the center motor wires group, use the 12V test pencil on one end to connect to Grand, and the other end to touch the tested wire. Use the remote or key to press the lock.  At the moment of the center motor locking the test pencil will flash, this wire is the center lock motor positive line. Use our product pink wire to connect to it.How to find out the center unlock motor positive line.Searching the wire at the center motor wires group, use the 12V test pencil on one end to connect to Grand, and the other end touches the tested wire. Use the remote or key to press unlock. At the moment of center motor locking, the test pencil will flash, this wire is the center unlock motor positive line. Use our product gray wire to connect to it. +12V line.Off the car use the test pencil one end touches grand GND the other end touches the measuring line, if the test pencil lights this line is a +12V power line.User Instruction.1. Finish installation turn the engine ON, and make sure the original car mirror folding works normally.2. Turn off the engine and close the door. Press the remote then the side mirror folds automatically.3. Press the remote then the side mirror opens automatically.4. Turn the engine ON side mirrors open automatically...

Easy To Install 5 Min Setup and quick wiring. easy to adjust the position and cut the perfect size to match your car. Strong Build Build with high-quality flexible and durable polyUrethane Material for long-term use. Water-Resistant High-Density Waterproof Material ensures your led spoiler is protected from Wind/ Rain/ Snow and the elements. Easy Installation: Step 1 Measure the length of your trunk from trunk edge to trunk edge. Trim the spoiler size. Step 2 Rub the mounting area with the 3M Primer and let dry for 45 seconds. Step 3 Press the spoiler on the mounting area. Power the LED spoiler and find your vehicle's corresponding wiring.After Installation: Compatibility:-For All Cars, Sales Package:-1 x LED universal spoiler Product Warranty:-1 Month..

These shadow ghost lights are for all Ford cars, these shadow lights have a sensor that will work with the door opening and closing every time you open the door it will on automatically and create a shadow of the Logo on the surface. This product is completely wireless and specially designed for Car modification for making your vehicle fancy and give more fun to the driver. its result is very bright at night or in dark places. There are two small magnets included in the package you to place this magnet on the door sill area when closing the door shadow light comes close to this magnet and turns off automatically. installation is very easy no need for wiring and drilling on the Car body, just stick the light on the Car door panel at the bottom side and stick the magnet on the Car door frame sill area.Compatibility: Endeavour, Freestyle, Figo, Figo Aspire, Ecosport.FeaturesThe product can be installed in the body kit, chassis, or another suitable place.Easy to install with 3M double-sided adhesive tape, no more trouble in making a hole.High power, high efficiency, energy-saving, no noise, no electric interface.3d style laser light of the illuminated entry systemThe special design causes the product with strict waterproof and thermal performance, which will make sure normal service in various harsh environments. Specification1. Powered by 3x AAA batteries 4.5V (batteries are not included)2. Output power: 3W3. Operating temperature: -40 degrees~105 degrees4.Dimensions: 6.5 x 6.5 x 1.5cm5. Special Features: Laser light, door lights, welcome lightInstall Instruction1. Install instructions about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.2. Install instructions for the shadow light: Stick the Magnet on the bottom of the Car frame. Stick the Car light on the Car door. The distance between the Magnet & Car light is about 10mm. When you close the Car door, the Magnet is under the face of the sensor on the Car logo light.3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light. ..

For the safer driving at night your car headlights should be brighter and focused beam. These headlights improve vision at night and give the more accurate brightness and projector headlamps provide a more focused beam and sharper light. Custom stylish modified headlights give your car a unique and distinctive look. Europian standard double xenon design, lense tangent to the left lower, right high, make light and not disorderly, besides low beam effect can also be in the switch, is the largest improve the lighting effect and driving safety. Smooth cool white light with perfect fusion for a vehicle and start the car, lights up automatically, to open small lights, brightness reduce by half. Lets your car during the daytime also send charm hi-end cars truly enjoy the honor. Amber headlight turns signal, driving more safe driving greatly reduces the incident of the accident.Note: These headlights only compatible for Ford New Endeavour Facelift 2019..

These lower window chrome garnishes made out of stainless steel material with a triple-layer chrome finish. Purpose to the install this chrome garnish trim is to enhance the car side profile look and add some metal finish look to the vehicle. Installation is very easy, double-sided tape is attached on the backside of each piece so that you can install it by yourself, but professionals installation would be preferred for the best result. Carhatke Lower Window Garnish also known as Lower Window Chrome,Compatible For:- This Lower Window Garnish is only for the Ford Endeavour Model, please read the title carefully before buying it.Installation: - Clean up properly applied area, make sure it's 100% dry, you can use a hair drier to provide some heat for the best result. do not wash your Car for 3-4 days after installation. In The Box: Set of 6 Pcs ..

Perfect Fit Designed to fit most small and medium car rear side windows, simple installation. Each automatic sunshade is well made, durable, and easy to use. Buy a set today before it gets any hotter out there! Anti-UV Protection This car side window automatic sunshade provides UV protection, cuts sun glare, reduces heat, and prevents your children from getting burned or overheated. Breathable Sun Shade The mesh is breathable, and because it’s on the exterior of the door frame, you can still roll down the windows and enjoy a nice breeze from outside while staying protected from the sun. Rolls up and down automatically when your window down and up. An aluminum tube with the sunshade and hook is attached to the sunshade to following the window up and down. Imported fabric restricted the light which comes from outside so outside people are unable to see inside the car, but people from inside can see the outside because it is a one-sided sunshade. It provides more privacy while driving the car. Compatibility:-Ford Endeavour Sales Package:-4 SunshadeAdhesive TapeScrew..

These Seats Cover made of imported Austrian PU fabric to ensure the best quality result. The advanced machine used to stitch and finishing. This seat covers made on original pattern size will be 100% perfectly match to the Ford Endeavour. These seat covers are fully bucketed to ensure getting the perfect fitting. Front Seat cover will be fully covered from the backside of the seats and also have a pocket where you can keep important things like documents, mobile charger and etc. Rear seats also will be fully covered from the backside. This seat cover comes in complete set with a front seat cover, rear seat cover, and headrest (if applicable in car). Seats cover 100% Waterproof highly durable.Installation - We did not provide the installation for any Car seat cover, we would like to recommend to get the installation from a professional as its save your time and also you will get the best result of the fitting.   Disclaimer - The image is the actual product though color may slightly differ from actual images. Note - Once you place the order you will be getting the call from our office to verify your order, vehicle color, and all details Or you can also call us at 8287647700 Between 11:00 AM To 6:00 PM.  After your confirmation in all, we dispatch your order...

These car seats cover is made with imported Australian PU fabric to ensure the best quality result. The advanced machine used to stitch and finish. These Australian PU fabric seat covers made on the original pattern size will be 100% perfectly match to the Ford Endeavour. These seat covers are fully bucketed to ensure getting the perfect fitting. The front seat cover will be fully covered from the backside of the seats and also have a pocket where you can keep important things like documents, mobile charger and etc. Rear seats also will be fully covered from the backside. This seat cover comes in a complete set with a front seat cover, rear seat cover, and headrest (if applicable in the car).  Seats cover 100% Waterproof highly durable. Custom Fit Seat Covers 100% custom fit seat cover for different makes and models, Our tailor-made seat cover according to your car seat side for best fitting. Protection that Works If you’re looking for a quick affordable way to breathe new life into the interior of your car then look no further Bucket Fitting Seat Cover Bucket Fitting Seat Cover gives your seat cover an elegant and premium look, our tailer is always made for 100% side-by-side fitting. Fashion design The unique diamond pattern is stylish and non-slip, High-end leather The High-End PU Leatherette is durable, and the matte texture is more advanced Delicate stitching There is no extra thread at the suture to ensure good quality Compatibility:-Ford Endeavour All Models. Sales Package:-Front & Rear Seat CoverSet of 2 PillowSet of 2 Neck Rest Product Warranty:-1 Year Fabric Warranty.Installation:-We did not provide the installation for any Car seat cover, we would like to recommend getting the installation from a professional as it saves your time, and also you will get the best result of the fitting. Note:-Images shown are just for illustration of the design and color of the seat covers and may not illustrate the exact seating arrangement of the car. Actual seat covers will be the perfect bucket fit for the seating arrangement for the above-mentioned car model. Once you place the order you will be getting a call from our office to verify your order, vehicle color, and all details.  After your confirmation, we take 2-3 days for making a seat cover for your car model, ..

Replace your company fitted existing boring grill by this latest mustang style front grill for your endeavour. This grill made of high-quality ABS Plastic material with led light effect.  This grill is perfect for who want to do some modification on the Car or want to enhance your Car exterior look. Note: this grill will only fit on new endeavour facelift 2019 model Product SpecificationHigh-quality ABS materialLED light with turn signalEnhance your Car exterior look..

Replace your company fitted existing boring grill with this latest mustang style front grill for your endeavor. This grill made of high-quality ABS Plastic material with a led light effect.  This grill is perfect for those who want to do some modification on the Car or want to enhance your Car exterior look. Note: this grill will only fit on the new endeavor facelift 2020 latest model ..

Replace your damage and crash tail lamp and give the all new look to your Endeavour. These tail lights can be directly replace by old OEM tail lights. Why put up with boring and costly OEM tail lamp replacement. If you can get Stylish LED modified tail lights with custom style that's very easy to install and easy to affordable.Plug-and-play install method for your convenienceConnect the car lamp cable to the original car cable in plug-and-play mode, plus easy-to-understand video installation instructions.The streamer led effect makes your taillight stand outUsing high brightness LED lamp beads, the streamer follows your left and right direction lights, staged a unique streamer show.Best factory production, strictly control the whole process of productionAdopt advanced manufacturing equipment and strict quality control standards to ensure product quality.Function:Reverse: WhiteMatrix  Turn Indicator: YellowBrake: RedPackage includes:1 pair of taillights with left side & right side.Compatible with Only:Ford New Endeavour 2015 Onwards .InstallationThis item has the same connections and wires with the original taillights. It is easy to installing (Professional installation recommended)...

The scuff sill plate is used to protect the car door sill area from dust, rust, and scratches and also add some lighting effects to the vehicle. glowing scuff sill plate helps boarding or de-boarding to the car easier in dark places or nighttime. led footstep will automatically illuminate when the door will open and adding wow effect. Black Glossy Mirror Finish These footsteps are made of acrylic material to ensure the best result. Adhesive Tape Comes with company-fitted adhesive tape on the backside for the best result. High Quality LED Made with high quality imported led light for long term glow  and  made with acrylic material. Compatibility:-Ford Endeavour New. Sales Package:-Set Of 4 LED Scuff Sill Plate. Product Warranty:-15 Days Warranty. Installation::-Connect with the interior dome light, the light will automatically on whenever the door will open. You need additional wiring to require and we recommend don't try to install it yourself.Note:-Showing pictures only for a material and quality purpose only, because this is a custom fit product, Actual product will send you according to your car model year and variant for best fitting...

Ford New Endeavour* Carhatke  Car Side Vent for Ford Endeavour with Lighting* No drilling or cutting required.* Specialized injection-molded shape assures perfect fit.* White light will get started on parking, yellow while indicating.Installation Process: 1) Clean the surface area of application thoroughly with a clean dry cloth to remove dust or grease2) Position the guard on the surface area and remove the release film without touching the adhesive on the guard3) Fit the guard in position and press firmly with a clean dry cloth4) Press each part for a minute or two, Tip-Turn on your car heater for better applicability and stickiness.5) Do not wash your car for 48 hours post-installation...