Maruti Suzuki Ignis 2017-2019 Accessories

Optimize for All Cars The luminous point and the position of the chuck are the same height as the halogen lamp, perfect replacement. Great Visibility Adopting car-grade G-XP chip, 360-degree light emission, without any dark spots and blind areas, making driving safer. Minimization The Temperature Water Test to prove the manufacturing quality, you can put the LED bulb into the water and the LED light will keep lighting. Dual Heat Dissipation System The bulb is equipped with a fan, heat sink, liquid cooling tube, multiple heat dissipation, extend the life more 50,000 hours. Hydraulic Control Built-in decoding chip, greatly reducing the problem of flicker, error message and radio interference. Advanced Cooling Fan Imported COB lighting source low power consuming, Long life-span and Powerful anti-static performance If you expect a quality LED headlight bulb that is combined with high-quality, super brightness of 130 Watts and efficient heat dissipation, if you are worried about the error code when installing the bulb. Featuring with its outstanding triple cooling system and a high number of 130W 13,600LM . Carhatke LED headlight bulb provides you with a brighter light, better heat dissipation, longer lifespan and 99% compatibility. Canbus-Ready Design With an upgraded intelligent Canbus design, This Carhatke LED bulb is compatible with 99% of vehicles with no radio interference, no flicking or error code, preventing over-voltage and over-current protection function. Perfect Light Beam Pattern The flip chip inside the LED car bulb is perfectly positioned to fix the housing in the correct spot. This ensures the best light beam pattern with a perfect 45°cut-off line for low beam and super focused light for high beam. You can also rotate the light beam pattern with a 360°retainer. There’s no dark spot, no issue with blinding oncoming traffic. Led Specs:-Save Power: Consumers Only 130 Watts(65 Each)Color: 6000K Cool WhiteOperating Life: >30000hrsOperating Temperature: -40C ~+90CInput Power: 130W +10%Operating Voltage: DC 120-24VLuminous Flux: 13600LMIP Rate: IP68Light Source Model: G-XP x3 CustomizedHeat Dissipation: Aviation Aluminum 6063+Red copper+ Dual Heat Coducting Tubes Quick Specs:-Long Span LifeInstant StartHighest Light EfficiencyRain ResistantLow BeamHigh BeamImported COB LED Compatible:-H1H4H19H7H8/H11/H16H27/880/881HB4/9006HB3/90059012 Socket Types:-H1, H4, H7, H8/H11/H16, HB3/9005, HB4/ 9006, 9012, H27 Sales Package:-2x Light Bulbs Product Warranty:-15 Month Warranty By Carhatke.comWarranty:15 Month complete replacement warranty by carhatke.com if you facing any issue with led bulb just call us on our register contact number and we will replace your bulb within 7 Days...

Car chrome door handles come in some high and luxury car models. Not every car maker company gives you chrome handles in their car model because of its cost factor. They keep handles in body colour paint or plain black without body colour, if it is affecting your car look and you are getting bored with them, then you should add some styling material to your car exterior look. These chrome handles make very a big difference in your car's exterior look, they add a classy bold metallic look to your vehicle. installation is very simple for these chrome handle covers, you can install them by yourself. double side adhesive tape is attached to every piece.Also Compatible For: Baleno 2015 Onwards/ Fronx 2023 Onwards/ Ertiga 2018 Onwards/ XL6 2019 Onwards/ Rumion 2023 Onwards/ Ignis 2016 Onwards/ Dzire 2017 Onwards/ Glanza 2019 Onwards.Note: These chrome handles are compatible with Ignis in all models like 1 keyhole, two keyholes, and also a sensor handle model...

Car chrome door handles come in some high and luxury car models. Not every car maker company gives you chrome handles in their car model because of its cost factor. They keep handles in body color paint or plain black without body color, if it is affecting your car look and you are getting bored with them, then you should add some styling material to your car exterior look. These chrome handles make very a big difference in your car's exterior look, it adds a classy bold metallic look to your vehicle. installation is very simple for these chrome handle covers, you can install them by yourself. double side adhesive tape is attached to every piece.Also Compatible For:  Baleno 2015 Onwards/ Fronx 2023 Onwards/ Ertiga 2018 [LXI, VXI, VDI] Onwards / XL6 2019 Onwards/ Ignis 2016 [Sigma/ Delta]Onwards/ Dzire 2017 Onwards/ Glanza 2019 Onwards...

The combo of iPH Projector with Carhatke 130W led that outperforms the stock headlights of the car. These fog lights come with high & low beam functions and are meant for those people who are looking for high-intensity lighting without affecting the visibility of oncoming drivers. Your search for the best intensity yet road legal fog lights ends here.Life Span of iPH CAR Projector Fog Lamp:Carhatke 130W Led is used in iPHCAR 3.0-inch Bi-Xenon Projector Fog Lamp, hence, it can deliver better performance for approx. 3 to 4 years, on driving 3-6 hours every day.About the Projector:Brand: iPHCAR, a well-known brand globallyMaterial: Shockproof Metal Housing for better lifespanQuality: Waterproof, Shockproof, DurableLens Size: 3.0 inch.NA WarrantyAbout 130W Led inside:True  130W  Super Bright Led.Max Temperature 87.6CHydraulic ControlDouble Tube Heat Dissipation6000K Pure WhiteLuminous Flux: 13600LMOptimize For Car and Bike15 Month  WarrantyCompatibility:Direct fit for all Cars by Suzuki or similar cars. (eg. Swift, Baleno, Wagon-R, Alto new, Ignis, Ciaz, Ertiga, Brezza, S-cross, XL6,  Celerio, Alto 800 etc.)Direct fit for other cars with 3 inches round fog lamp (eg. Ford Figo, Ecosport, Nexon, Compass, Amaze, Etios, City, Duster, etc. )For other cars, little alterations required with the clamp to get it fitted.Carhatke will support with fitment as well.Installation:Professional installation recommendedDirect connection with the fog lamp wire coming from the master wiring harness.For high beam, the high beam/ solenoid wires to be connected with headlight high beam wires.Or you may use a separate switch for the fog lamp high beam.Insulate every connecting point properly to avoid any technical or physical damage.Package Includes:2 x iPHCAR Projector Fog Lamp2 x Carhatke 130W Led Bulbs2 x Brackets2 x BallastsMounting ScrewsFog Light Wiring Kits & Couplers (Addon)Warranty:Carhatke 130W LED Comes with 15 Month Warranty.Note:1. If you want to keep the Wiring of this kit Separate from the Car’s electricals, simply use the Kit with Relay Harness...

The touch will change to the light and the 7-color light will automatically convert it. The K9 crystal three-dimensional multi-faceted cutting technology makes the material hard and wear-resistant.Built-in long efficient rechargeable battery (can be charged for about 20 days at a time). To install, simply twist, loosen and remove the shift knob and replace it. Note: This gear knob is only compatible with Manual Transmission...

Car Window Door Visor For Maruti Nexa Ignis Set Of 4 (Black)..

Easy To Install 5 Min Setup and quick wiring. easy to adjust the position and cut the perfect size to match your car. Strong Build Build with high-quality flexible and durable polyUrethane Material for long-term use. Water-Resistant High-Density Waterproof Material ensures your led spoiler is protected from Wind/ Rain/ Snow and the elements. Easy Installation: Step 1 Measure the length of your trunk from trunk edge to trunk edge. Trim the spoiler size. Step 2 Rub the mounting area with the 3M Primer and let dry for 45 seconds. Step 3 Press the spoiler on the mounting area. Power the LED spoiler and find your vehicle's corresponding wiring.After Installation: Compatibility:-For All Cars, Sales Package:-1 x LED universal spoiler Product Warranty:-1 Month..

Clear Lens This iphcar projector fits 70% of the models, which is suitable for car better lighting and making your car high-end. Brightness Top Level Will not blind the oncoming vehicles, Be Safe Drive Safe with High-Quality Projector Lens. Original Product Easy to install, no damage to your car. Original iphcar has some original quality. Original iPH Projector Fog Light HousingHigh and low beam bi-xenon fog projector lights. Glass produced by a curing system anti-scratching, anti-corrosion, and fade-proof. High and low beam bi-xenon fog projector lights Two kinds of brackets for easy installations Top portion waterproof, because of high-selling Glass produced by curing system anti-scratching, anti-corrosion, fade-proof Installation: Professional installation recommendedDirect connection with the fog lamp wire coming from the master wiring harness.For high beams, the high beam/ solenoid wires are to be connected with headlight high beam wires.Or you may use a separate switch for the fog lamp's high beam.Insulate every connecting point properly to avoid any technical or physical damage.Carhatke will support with fitment as well. Compatibility:-Lens: 2.5 inches. Package Includes:-2 x iPH CAR Projector M611 2 x Brackets..

Clear Lens This iphcar projector fits 70% of the models, which is suitable for car better lighting and making your car high-end. Brightness Top Level Will not blind the oncoming vehicles, Be Safe Drive Safe with High-Quality Projector Lens. Original Product Easy to install, no damage to your car. Original iphcar has some original quality. Original iPH Projector Fog Light HousingHigh and low beam bi-xenon fog projector lights. Glass produced by curing system anti-scratching, anti-corrosion, fade-proof. High and low beam bi-xenon fog projector lights Two kinds of brackets for easy installations Top portion waterproof, because of high-selling Glass produced by curing system anti-scratching, anti-corrosion, fade-proofCompatibility:-Direct fit for all cars by Suzuki or similar cars. (eg. Swift, Baleno, Wagon-R, Alto new, Ignis, Ciaz, Ertiga, Brezza, S-cross, XL6, etc.)Direct fit for other cars with 3 inches round fog lamp (eg. Amaze, City, Figo, Aspire, Tiago, Tigor, Innova, Fortuner Nexon, Old Ecosport, Duster, Compass, Polo, Vento, WRV, etc. )For other cars, little alterations are required with the clamp to get it fitted. Installation: Professional installation recommendedDirect connection with the fog lamp wire coming from the master wiring harness.For high beam, the high beam/ solenoid wires to be connected with headlight high beam wires.Or you may use a separate switch for the fog lamp high beam.Insulate every connecting point properly to avoid any technical or physical damage.Carhatke will support with fitment as well. Compatibility:-Direct fit in most of the regular cars.Lens: 3.0 inches. Package Includes:-2 x iPH CAR Projector M612 2 x Brackets..

Perfect Fit Designed to fit most small and medium car rear side windows, simple installation. Each automatic sunshade is well made, durable, and easy to use. Buy a set today before it gets any hotter out there! Anti-UV Protection This car side window automatic sunshade provides UV protection, cuts sun glare, reduces heat, and prevents your children from getting burned or overheated. Breathable Sun Shade The mesh is breathable, and because it’s on the exterior of the door frame, you can still roll down the windows and enjoy a nice breeze from outside while staying protected from the sun. Rolls up and down automatically when your window down and up. An aluminum tube with the sunshade and hook is attached to the sunshade to following the window up and down. Imported fabric restricted the light which comes from outside so outside people are unable to see inside the car, but people from inside can see the outside because it is a one-sided sunshade. It provides more privacy while driving the car. Compatibility:-Maruti Ignis All Models Sales Package:-4 SunshadeAdhesive TapeScrew Product Warranty:-1 Month Manufacturing Defect Warranty...

Window Car Door Visor Help to kept the window open in the light rain weather so that you can enjoy the rain. It also ensures that car window shields do not fog due to humidity. The door visor also prevents the direct sun rays on the side of the car. Apart from these Car Door Visors also enhance the exterior look of the car. The Door Visor also allows fresh air to naturally circulate through open windows while keeping the rain and wind out. Stylish Look Excellent design that enhances your car side profile look. Custom Fit Custom-fit design to ensure perfect fitting & size according to the specific vehicle model & brand. Comfort and Safety The door visor also deflects the wind, which reduces the noise outside of the car when you drive. Door Visor Easy Installation Step 1 Place the door visor on the window frame to check the position of pieces, before installation of door visor. Step 2 Clean and wipe properly apply surface area to make sure there was no dust, moisture, and water on the applied surface area. Step 3 Now remove the seal of the double-sided strong adhesive tape which is attached on the backside of every piece of the door visor. Step 4 Ensure accurate position, then press the product to make it tightly. Step 5 Do not wash your Car for 2-3 days after in material stacking window door visor. Step 6 You have all done now remove the blue-tinted wrapper from the chrome or silver line.   Compatibility:-For  Maruti Ignis Sales Package:- Set of 4 Door Visor. Product Warranty:-1 Month Manufacturing Defect Warranty. Note:-Showing pictures only for a material and quality purpose only, because this is a custom fit product, Actual product will send you according to your car model year and variant for best fitting...

These fog lights are only compatible with the maruti ignis model. It is OEM type fog lamp that is perfectly fit into your car, you don't need to any alteration in your Car body, just remove exiting fog cover and fix it. wiring will be very simple because it is plug and play type socket to socket fitting, to ensure your warranty will not lapse. you will get the two fog lamp, 2 bulb, wiring, switch and nuts in the box. ..

Built-in GPS  Support Online and Offline Navigation App Such as Google Map, Map, Support 3D Maps, and Voice Guidance. 2.5D Curved Screen 2.5D curved panel could resist scratch, would be more light and smooth. Split Screen Mode Video is always displayed in inset windows, you can set the video interface size as you like. WIFI Hotspot With wifi connected, you can download almost any apps you want. Car player with Android 8.1 system, it’s compatible with most of the navigation apps in the google play store, such as Map, Youtube, Facebook, Carhatke, Netflix, Etc. Bluetooth Function Bluetooth version: 4.0. Support Android and iOS device connection. You can answer the phone call through Bluetooth on the stereo, and listening to music from your phone, which is more safety while you are driving. FM Radio Built-in FM with 18 preset stations, with this car radio, you can listen to real-time traffic, news broadcasts, weather forecasts. And you will never miss your favorite radios anymore. Play your favorite RJ on the car. Android/IOS Mirror Link IOS supports mobile phone one-way projection to the machine  Android supports mobile phone iOS devices mirror link via wifi. Android devices mirror link via wifi or USB cable. Steering Wheel Controls You can control the functions you need by steering wheel, all you want at your fingertips, more convenient. please check the Steering Wheel Controls on the Website. Rearview Camera Input It will change to HD reversing view automatically while backing & parking your car. Camera with 12 LEDs. please check the Parking Back Camera on the Website. Quick Specs:-Capacitive digital TFT Touch Screen 1080P HD Definition MOSFET amplifier:60watts X 4 max power output FM Range:87.5MHz~108.00mhz Power-off with auto-memory store function 16 GB internal memory and 2 GB of ram Clock function Mute functionBT function Bass & Treble, L&R channel stabilizer Aux Input function easy connection 4G Optional Gorilla Glass Wiring Diagram:-Front Left Speaker+ Rear right Speaker- Front Left Speaker- Rear Right Speaker+ Front Right Speaker+ Rear Left Speaker+ Front Left Speaker- Rear Left Speaker- Parking Sensor Control wires Power Antenna/ Amplifier Turn On Reverse Detection Steering wheel key control line +12V Accessory/Switch ILL Ground Wire +12 Constant Power Supply Stereo Compatible:-DSP inside Digital Signal Processing Compatible with an OEM parking sensor Compatible with door display Compatible with steering mounted controls Compatible with an analog panel and parking sensor switch Compatible with OEM camera Compatible with climate control display support only higher modelsCompatible with mood light original OEM amplifier(Hexa)Compatible with door lock-unlock and all other OEM featSupport the Music playback format of mp3, WWA, AAC, WAV, FLAC, APESupport the Video playback format for Mpeg1, Mpeg2, Mpeg4, SP/ASP, GMS, XVID, H.263, H.264, AVS, JPEG/MJEPG Compatibility:-Maruti Nexa Ignis All Models, Sales Package:-Stereo Head UnitStereo FramePower CordRCA Line4 Pin USB Extention Cable6 Pin USB Extention CableGPS AntennaMic10 Pin Rear Video Input Product Warranty:-1Year Warranty from Carhatke.com Attention:Before dispatch, we will contact the buyer to assure the year, model & variant of the carSome brand's top variants require extra CAN bus, activator or wiring kits to link all the functionsAll parts of our stereos will be available in the future to ensure complete peace of mind to our buyers If you or your mechanic face any issue while installing the stereo so don't worry about it we will provide you a video call from a company engineer and they will guide you and solve your all issues. ..

The scuff sill plate is used to protect the car door sill area from dust, rust, and scratches and also add some lighting effects to the vehicle. glowing scuff sill plate helps boarding or de-boarding to the car easier in dark places or nighttime. led footstep will automatically illuminate when the door will open and adding wow effect. Black Glossy Mirror Finish These footsteps are made of acrylic material to ensure the best result. Adhesive Tape Comes with company-fitted adhesive tape on the backside for the best result. High Quality LED Made with high quality imported led light for long term glow  and  made with acrylic material. Compatibility:-Maruti Suzuki Ignis. Sales Package:-Set Of 4 LED Scuff Sill Plate. Product Warranty:-15 Days Warranty. Installation::-Connect with the interior dome light, the light will automatically on whenever the door will open. You need additional wiring to require and we recommend don't try to install it yourself.Note:-Showing pictures only for a material and quality purpose only, because this is a custom fit product, Actual product will send you according to your car model year and variant for best fitting...

This car-led footstep sill plate is a 100% brand new product. It is made of hard acrylic material with led lights and not allowing bent. It gives a nice light effect on your vehicle when you open your car door, the light will on automatically. Superior material is used to made for it to ensure the best finish and durability. A high gloss black finish looks elegant on the vehicle. Compatible For:- This led scuff sill plate footstep is only for the Maruti Suzuki Ignis model, please read the title carefully before buying it...

This magnetic sunshade protects you from unwanted heat and sun glare. Magnetic sunshades are custom-fit sunshades that ensure exact size and match according to the car model. Magnets are used on the edges for easy installation. you just have to open your car door and place the sunshade closer to the window frame on it and it will automatically stick on the frame. No professional skills required to install it. The magnet also provides security when you down your window glass at high speed. This magnetic sunshade keeps your car interior cool inside and increase your AC performance in hot weather. front two sunshades have the zip option that can open some space of shades where you can easily throw unwanted things outside from your car.Product Highlights Easy to install, no screw and drilling required. Exact size according to your Car window. Prevent UV sun-rays heat. Help to keep the temperature low of the car interior. Vehicle Compatibility :- Maruti Suzuki Ignis. ..

If you are looking for luxury, stylish, and waterproof car foot mat for your Maruti Suzuki Ignis then car 7D mat surely your first choice. A perfect combination of luxury, styling, and maximum protection. 7d mat raised edges to cover the entire floor area and provide maximum protection from dust, oil, mud, water, and snow. These mats are 100 Percent Environment-friendly. 7D mat has also a grass mat attached on the top surface to give the extra protection and make these mat easy wash and maintain. On the bottom side of the mat is covered with the Velcro sheet to make anti-slip. Very easy to install and maintain these mat wash anytime because mats are 100 Percent waterproof.  These 7d floor mats will be made with the best quality materials and also provide 7 depth layer protection.7 depth layers protections:Wire Loop - Non-slip, waterproof, noise reduction and antifouling to bear or endure dirty, protect the car interior.Heavy-duty vinyl backing - Makes it Anti Slip, Waterproof, Dust-proof, Protects stains, fading, dirt, Easy to clean.PU Leather - very little maintenance such as cleaning and wiping dirt and dust from its surface.Sponge - Shock and Sound Absorbent Inner Layer.Non-Woven Fabric - liquid repellence, resilience, stretch, softness, strength, flame retardancy, washability, cushioning, thermal insulation, acoustic insulation, filtration, use as a bacterial barrier, and sterility.XPE - Heat Insulation: Shaping Capability, Sound Absorption, and Cushion Capability.Anti-Slip Bottom - Bottom Layer Keeps Mats in Place Without Harming Original Carpet.Installation: Before you start,  clean the carpet area with a vacuum cleaner so that there is no dust or debris under it. Now, take each mat and identify which mat would fit each side. And easily fit all matsWarranty: One Month Manufacturing Defect Warranty..

These Seats Cover made of imported Austrian PU fabric to ensure the best quality result. The advanced machine used to stitch and finishing. This seat covers made on original pattern size will be 100% perfectly match to the Maruti Suzuki Ignis. These seat covers are fully bucketed to ensure getting the perfect fitting. Front Seat cover will be fully covered from the backside of the seats and also have a pocket where you can keep important things like documents, mobile charger and etc. Rear seats also will be fully covered from the backside. This seat cover comes in complete set with a front seat cover, rear seat cover, and headrest (if applicable in car). Seats cover 100% Waterproof highly durable.Installation - We did not provide the installation for any Car seat cover, we would like to recommend to get the installation from a professional as its save your time and also you will get the best result of the fitting.   Disclaimer - The image is the actual product though color may slightly differ from actual images. Note - Once you place the order you will be getting the call from our office to verify your order, vehicle color, and all details Or you can also call us at 8287647700 Between 11:00 AM To 6:00 PM.  After your confirmation in all, we dispatch your order...