Maruti Suzuki Brezza 2022 Accessories

This auto mirror folding relay kit is only compatible with the Maruti Suzuki Car model. After installing this relay kit your side mirror will close automatically whenever you lock the door and it will automatically open whenever the ignition is on in your car. You don't have to cut any wire during the installation, but you might be wiretapped that you have used for the connection to the central locking system.Vehicle Compatibility Maruti Suzuki CarsSwift, Swift 18, Onwards.Swift Dzire, Dzire 17 Onwards.Ignis, Ciaz, S Cross.Ertiga, Ertiga 18 Onwards, XL6.Baleno, Baleno 2022 Onwards, Glanza.Brezza 2022 Onwards.Toyota Glanza.Wagon R.Fronx.Grand Vitara.Attention.This product is only used if your Car model side mirror folds from the manual button inside.If your car does not have the button inside to fold and unfold the mirror don't buy it.The side mirror should be electronic for using this relay.Operation.   1. Press the remote lock mirror folding.   2. Press the remote to unlock the mirror opening.Brief Installation of instruction. Find out the original car mirror folder switch.Separate plug to original car switch, use product's male plug connects to switch plug and product's female plug connect to wrings group.According to the following picture connect the line.How to find out the center lock motor positive line.Searching the wire at the center motor wires group, use the 12V test pencil on one end to connect to Grand, and the other end to touch the tested wire. Use the remote or key to press the lock.  At the moment of the center motor locking the test pencil will flash, this wire is the center lock motor positive line. Use our product pink wire to connect to it.How to find out the center unlock motor positive line.Searching the wire at the center motor wires group, use the 12V test pencil on one end to connect to Grand, and the other end touches the tested wire. Use the remote or key to press unlock. At the moment of center motor locking, the test pencil will flash, this wire is the center unlock motor positive line. Use our product gray wire to connect to it. +12V line.Off the car use the test pencil one end touches grand GND the other end touches the measuring line, if the test pencil lights this line is a +12V power line.User Instruction.1. Finish installation turn the engine ON, and make sure the original car mirror folding works normally.2. Turn off the engine and close the door. Press the remote then the side mirror folds automatically.3. Press the remote then the side mirror opens automatically.4. Turn the engine ON side mirrors open automatically...

Upgrade the look of your New Brezza with these unique Batman-style mirror Covers. Designed to add a stylish and sporty touch to your vehicle, these mirror covers are easy to install and made from high-quality materials for durability and longevity.Package Includes:1 X Right Side Bat Man Mirror Cover1 X Left Side Bat Man Mirror CoverCompatibility:All Models and Generations...

..

Maruti Suzuki Brezza 2022 Onwards Body Side Moulding - Set of 4..

These high-quality projector fog lamps are designed to enhance visibility during adverse weather conditions. Whether you’re driving a car, these fog lamps offer excellent illumination. Here are the key features:Universal Fit: These fog lamps are compatible with 3 inch fog lamp cars. They can be easily installed on various vehicle models. LED Technology: These fog lamps utilize energy-efficient LED Chips. These LEDs provide bright, focused light without consuming excessive power. 3-Inch Projector Lens: The projector lens design ensures precise light distribution, minimizing glare and maximizing visibility. You’ll have a clear view of the road ahead, even in foggy or misty conditions. Durable Construction: Constructed from robust materials, these fog lamps are built to withstand vibrations, impacts, and weather elements. They are designed for long-lasting performance. Easy Installation: The package includes all necessary components for installation. Simply follow the instructions to mount these fog lamps securely. Enhanced Safety: Foggy weather can significantly reduce visibility. These projector fog lamps help you stay safe by cutting through the mist and providing a well-defined beam of light. Quick Specs:-Waterproof: IP65Power Source: BI-LEDInput Voltage: DC 9V-16VWorking Temperature: -20c-100cDimming Mechanism: 12V 9.6WDriver: Internal DriverGlass: 2.8HD GlassLife Of Usage: >50000hBeam:-Low Beam Wattage: 6 Chips 45W+2WHigh Beam Wattage: 6 LED Chips +Dimming = 55W+2WLOW Beam LUX (8M): 1000-1300LXHigh Beam LUX (8M): 1100-1400LX Sales Package:-2 X Projector2 X Fitting BracketScrews Warranty:1 Year Warranty by carhatke.com if you are facing any issues with the projector just call us on our registered contact number and we will replace your product within 7 Days...

Optimize for All Cars The luminous point and the position of the chuck are the same height as the halogen lamp, perfect replacement. Great Visibility Adopting car-grade G-XP chip, 360-degree light emission, without any dark spots and blind areas, making driving safer. Minimization The Temperature Water Test to prove the manufacturing quality, you can put the LED bulb into the water and the LED light will keep lighting. Dual Heat Dissipation System The bulb is equipped with a fan, heat sink, liquid cooling tube, multiple heat dissipation, extend the life more 30,000 hours. Hydraulic Control Built-in decoding chip, greatly reducing the problem of flicker, error message and radio interference. Advanced Cooling Fan Imported COB lighting source low power consuming, Long life-span and Powerful anti-static performance If you expect a quality LED headlight bulb that is combined with high-quality, super brightness of 130 Watts and efficient heat dissipation, if you are worried about the error code when installing the bulb. Featuring with its outstanding triple cooling system and a high number of 130W 13,600LM . Carhatke LED headlight bulb provides you with a brighter light, better heat dissipation, longer lifespan and 99% compatibility. Canbus-Ready Design With an upgraded intelligent Canbus design, This Carhatke LED bulb is compatible with 99% of vehicles with no radio interference, no flicking or error code, preventing over-voltage and over-current protection function. Perfect Light Beam Pattern The flip chip inside the LED car bulb is perfectly positioned to fix the housing in the correct spot. This ensures the best light beam pattern with a perfect 45°cut-off line for low beam and super focused light for high beam. You can also rotate the light beam pattern with a 360°retainer. There’s no dark spot, no issue with blinding oncoming traffic. Quick Specs:-Save Power: Consumers Only 130 Watts(65 Each)Color: 6000K Cool WhiteOperating Life: >30000hrsOperating Temperature: -40C ~+90CInput Power: 130W +10%Operating Voltage: DC 12-24VLuminous Flux: 13600LMIP Rate: IP68Light Source Model: G-XP x3 CustomizedHeat Dissipation: Aviation Aluminum 6063+Red copper+ Dual Heat Coducting Tubes Wiring Diagram:-Long Span LifeInstant StartHighest Light EfficiencyRain ResistantLow BeamHigh BeamImported COB Sales Package:-H1H4H19H7H8/H11/H16H27/880/881HB4/9006HB3/90059012 Socket Types:-H8/H11/H16 Sales Package:-2x Light Bulbs Product Warranty:-1 Year Warranty By Carhatke.com Warranty:1 Year complete replacement warranty by carhatke.com if you are facing any issues with the led bulb just call us on our registered contact number and we will replace your bulb within 7 Days...

Car chrome door handles come in some high and luxury car models. Not every car maker company gives you chrome handles in their car model because of its cost factor. They keep handles in body colour paint or plain black without body colour, if it is affecting your car look and you are getting bored with them, then you should add some styling material to your car exterior look. These chrome handles make very a big difference in your car's exterior look, they add a classy bold metallic look to your vehicle. installation is very simple for these chrome handle covers, you can install them by yourself. double side adhesive tape is attached to every piece.Also Compatible For: Brezza 2016 Onwards/ Grand Vitara 2022 Onwards/ Swift 2011-17/ Ritz 2009 Onwards/ Dzire 2010-2017/ SX4 2007 Onwards/ Ertiga 2012-2017/ Celerio 2014 Onwards/ Ignis 2017 Onwards/ Hyryder 2022 Onwards.Note: These chrome handles are compatible with Brezza in all models like 1 keyhole, two keyholes, and also a sensor handle model...

Replace Your Brezza 2022 Onwards Steering That does not have the Remote Control Button For The Media And Bluetooth Control. Install This Steering To Control Your all Media And Calling Function...

These Brezza Window Car Door Visor Help to kept the window open in the light rain weather so that you can enjoy the rain. It also ensures that car window shields do not fog due to humidity. The door visor also prevents the direct sun rays on the side of the car. Apart from these Car Door Visors also enhance the exterior look of the car. The Door Visor also allows fresh air to naturally circulate through open windows while keeping the rain and wind out. Stylish Look Excellent design that enhances your car side profile look. Custom Fit Custom-fit design to ensure perfect fitting & size according to the specific vehicle model & brand. Comfort and Safety The door visor also deflects the wind, which reduces the noise outside of the car when you drive. Door Visor Easy Installation Step 1 Place the door visor on the window frame to check the position of pieces, before installation of door visor. Step 2 Clean and wipe properly apply surface area to make sure there was no dust, moisture, and water on the applied surface area. Step 3 Now remove the seal of the double-sided strong adhesive tape which is attached on the backside of every piece of the door visor. Step 4 Ensure accurate position, then press the product to make it tightly. Step 5 Do not wash your Car for 2-3 days after in material stacking window door visor. Step 6 You have all done now remove the blue-tinted wrapper from the chrome or silver line.   Compatibility:-Maruti Suzuki Brezza 2016-2022 Sales Package:- Set of 4 Door Visor. Product Warranty:-1 Month Manufacturing Defect Warranty. Note:-Showing pictures only for a material and quality purpose only, because this is a custom fit product, Actual product will send you according to your car model year and variant for best fitting...

Maruti Suzuki New Brezza Roof Rails are placed on the top of the car roof. The purpose is to install roof rails in any car to carry bulky luggage. But in some hatchbacks, the roof rail is used to maintain the balance of the car at high speed, or some people install a roof rail in the car to enhance the vehicle's exterior look. In modern car design, a roof rail is a must-have accessories in your car.Protection: These roof garnish protect the roof from damage, scratch and minor impactsAesthetic Appeal: New Brezza Roof rail garnish enhances the visual appeal of car by providing a sleek and finished look. It can complement the overall design and add a touch of style to the vehicle.Compatibility with Accessories: Roof rail garnishes can sometimes include features that facilitate the attachment of roof racks, cargo carriers, and other accessories, making it easier to transport items without damaging the vehicle's roof.Installation: Installation is very easy for the roof rail, you don't need to require screwing and drilling just match the pieces to the application area and paste it. Before installing or paste any roof garnish make sure that apply area is fully dry clean properly, if any oil, water, and dust particle on the apply surface area it will not stick and past properly.  Do not wash your for a minimum of 3-4 days after installing this garnish...

Maruti Suzuki New Brezza Roof Rails are placed on the top of the car roof. The purpose is to install roof rails in any car to carry bulky luggage. But in some hatchbacks, the roof rail is used to maintain the balance of the car at high speed, or some people install a roof rail in the car to enhance the vehicle's exterior look. In modern car design, a roof rail is a must-have accessories in your car.Protection: These roof garnish protect the roof from damage, scratch and minor impactsAesthetic Appeal: New Brezza Roof rail garnish enhances the visual appeal of car by providing a sleek and finished look. It can complement the overall design and add a touch of style to the vehicle.Compatibility with Accessories: Roof rail garnishes can sometimes include features that facilitate the attachment of roof racks, cargo carriers, and other accessories, making it easier to transport items without damaging the vehicle's roof.Installation: Installation is very easy for the roof rail, you don't need to require screwing and drilling just match the pieces to the application area and paste it. Before installing or paste any roof garnish make sure that apply area is fully dry clean properly, if any oil, water, and dust particle on the apply surface area it will not stick and past properly.  Do not wash your for a minimum of 3-4 days after installing this garnish...

The Galio Stainless Steel Door Sill Guards for the Maruti Suzuki Brezza are designed to protect the door sills from scratches, scuffs, and damage. These sill guards are typically made from high-quality stainless steel, which adds durability and a premium look to the vehicle. They often come with the vehicle's logo or branding, and installation is usually straightforward, using adhesive backing.These guards serve both a functional and aesthetic purpose, enhancing the overall look of your car while also protecting it. They are particularly useful in preventing damage caused by footwear or luggage when entering or exiting the vehicle.Waterproof: These sill guards are made from stainless steel, which is naturally resistant to rust and corrosion, making them waterproof and ideal for all weather conditions.High Quality: Galio is known for its use of high-grade materials, ensuring that these sill guards are durable and long-lasting. The stainless steel construction provides a sleek, premium finish that complements the vehicle's design.Easy Installation: The sill guards are typically designed for easy, do-it-yourself installation. They come with adhesive backing, making it simple to attach them to the door sills without the need for any special tools or professional help...

Enhance the sporty look of your vehicle with these stylish GFX Car Decorative Side Vents. This set of two vents is designed to provide a sleek and aerodynamic appearance, complementing the dynamic lines of your car. Crafted with precision, these vents feature the eye-catching 'G Drive' branding, adding a touch of energy and style to your ride. While primarily serving as a decorative element, these vents also offer functional benefits by allowing for improved airflow and ventilation. With their universal fit, they can be seamlessly integrated into most car models, making them a versatile accessory. Elevate your driving experience with these GFX Car Decorative Side Vents and turn heads wherever you go.GFX Side VentSleek Design: Adds a modern, stylish look to any vehicle with its sleek, aerodynamic design.Universal Fit: The vents are designed to fit most cars and SUVs with a simple peel-and-stick installation.High-Quality Material: Made from durable, weather-resistant materials to withstand various driving conditions.Low Maintenance: Easy to clean and maintain with minimal effort, ensuring long-lasting appearanceEasy Installation: Equipped with a strong adhesive backing for simple, tool-free application...

Waterproof, top quality metal made 3D sticker, 100% brand new, looks creative and cool. With strong adhesive tape, easy to install, removable.Installation: You Must Make Sure You Will Install Emblem On a Flat Position Because The Emblem Back is Flat, Do Not Paste on Curve Surface Adhesive Tape is on Back, Easy to Decorate Your Car. Just Clean the Surface of Your Car Before Pasting Satisfaction Guaranteed..

Enhance the look and safety of your New Brezza with this premium LED Reflector Light. Designed to fit perfectly into the rear bumper, this reflector light adds a bold aesthetic touch while offering practical functions like:Scanning – Dynamic amber flow-style lighting adds a modern touch.Matrix Indicator Mode – Sequential LED pattern for a high-end look.Brake Light Function – Bright red LEDS instantly respond when brakes are applied for added safety.Durable & Waterproof – Built to handle rough weather and road conditions.Functions / Features:ScanningMatrix Turn IndicatorBright Brake Light..

UV RAYS PROTECTION - Our car sun shade is Guaranteed to provide protection from sun glare and heat- The car window sun shade blocks over 75% of harmful UV Rays . This can protect your baby and passengers from skin irritation and bright sunlight.PROVIDE PROTECTION -- Help kids, baby, other passengers and pets to get protection from sun glare, sun heat, harmful UV rays and to have a greater privacy. It won't block the scenery outside the car and give you a comfortable inside environment of the car.Provide Premium Quality. Magnetic Sun shade for easy installation & removal Keeps car cool, Custom fit for the cars, Clear visibility Package:Front Window Glass: 2 Pcs (Half Cut For Side Mirror View + Magnetic)Rear Window Glass: 2 Pcs (Magnetic.)Quarter Window Glass: 2 Pcs (Magnetic.)..

If you are looking for a way to add comfort, convenience, and style to your Maruti Suzuki New Brezza, then a New Brezza armrest is a great option. It is a relatively inexpensive upgrade that can make a big difference in your driving experience.Storage - the console has a decent storage space where you can keep things inside like wallet, card holder, mobile and watch, etc.Comfort - while driving is very important in long drive and this console armrest make it easy for you.Built - car armrest / elbow arm rest / support pads are made of wood and high quality materialCompetible:Armrest for Brezza 2022 Onwards...

The touch will change to the light and the 7-color light will automatically convert it. The K9 crystal three-dimensional multi-faceted cutting technology makes the material hard and wear-resistant.Built-in long efficient rechargeable battery (can be charged for about 20 days at a time). To install, simply twist, loosen and remove the shift knob and replace it...