Maruti Suzuki Ertiga 2018 Accessories

Optimize for All Cars The luminous point and the position of the chuck are the same height as the halogen lamp, perfect replacement. Great Visibility Adopting car-grade G-XP chip, 360-degree light emission, without any dark spots and blind areas, making driving safer. Minimization The Temperature Water Test to prove the manufacturing quality, you can put the LED bulb into the water and the LED light will keep lighting. Dual Heat Dissipation System The bulb is equipped with a fan, heat sink, liquid cooling tube, multiple heat dissipation, extend the life more 50,000 hours. Hydraulic Control Built-in decoding chip, greatly reducing the problem of flicker, error message and radio interference. Advanced Cooling Fan Imported COB lighting source low power consuming, Long life-span and Powerful anti-static performance If you expect a quality LED headlight bulb that is combined with high-quality, super brightness of 130 Watts and efficient heat dissipation, if you are worried about the error code when installing the bulb. Featuring with its outstanding triple cooling system and a high number of 130W 13,600LM . Carhatke LED headlight bulb provides you with a brighter light, better heat dissipation, longer lifespan and 99% compatibility. Canbus-Ready Design With an upgraded intelligent Canbus design, This Carhatke LED bulb is compatible with 99% of vehicles with no radio interference, no flicking or error code, preventing over-voltage and over-current protection function. Perfect Light Beam Pattern The flip chip inside the LED car bulb is perfectly positioned to fix the housing in the correct spot. This ensures the best light beam pattern with a perfect 45°cut-off line for low beam and super focused light for high beam. You can also rotate the light beam pattern with a 360°retainer. There’s no dark spot, no issue with blinding oncoming traffic. Led Specs:-Save Power: Consumers Only 130 Watts(65 Each)Color: 6000K Cool WhiteOperating Life: >30000hrsOperating Temperature: -40C ~+90CInput Power: 130W +10%Operating Voltage: DC 120-24VLuminous Flux: 13600LMIP Rate: IP68Light Source Model: G-XP x3 CustomizedHeat Dissipation: Aviation Aluminum 6063+Red copper+ Dual Heat Coducting Tubes Quick Specs:-Long Span LifeInstant StartHighest Light EfficiencyRain ResistantLow BeamHigh BeamImported COB LED Compatible:-H1H4H19H7H8/H11/H16H27/880/881HB4/9006HB3/90059012 Socket Types:-H1, H4, H7, H8/H11/H16, HB3/9005, HB4/ 9006, 9012, H27 Sales Package:-2x Light Bulbs Product Warranty:-15 Month Warranty By Carhatke.comWarranty:15 Month complete replacement warranty by carhatke.com if you facing any issue with led bulb just call us on our register contact number and we will replace your bulb within 7 Days...

Maxxlink Type Maruti Suzuki Cars 2018 Onwards OEM Type Rear View CameraToday parking a Car in a crowdy area is a very tough job for any driver, especially in India where the roads are narrow and people parked their cars in a very unorganized manner. But These OEM reverse parking cameras can make your job easy. It is a completely oem-type camera mount on a license plate without any screwing and drilling. it is .it provides a 170-degree large-angle rear view for you when you reverse your car. quality of the product is top of the line in this segment of cameras. there are also 4 led lights on the corners of the camera that help to improve vision at night time. the camera is compatible with Maruti's New Suzuki Cars 2018. Vehicle Compatible Only:Maruti Suzuki Swift 2018 Onwards.Maruti Suzuki Ertiga 2018 Onwards.Maruti Suzuki XL6 2018 Onwards.Maruti Suzuki Brezza 2016 -2021...

The combo of iPH Projector with Carhatke 130W led that outperforms the stock headlights of the car. These fog lights come with high & low beam functions and are meant for those people who are looking for high-intensity lighting without affecting the visibility of oncoming drivers. Your search for the best intensity yet road legal fog lights ends here.Life Span of iPH CAR Projector Fog Lamp:Carhatke 130W Led is used in iPHCAR 3.0-inch Bi-Xenon Projector Fog Lamp, hence, it can deliver better performance for approx. 3 to 4 years, on driving 3-6 hours every day.About the Projector:Brand: iPHCAR, a well-known brand globallyMaterial: Shockproof Metal Housing for better lifespanQuality: Waterproof, Shockproof, DurableLens Size: 3.0 inch.NA WarrantyAbout 130W Led inside:True  130W  Super Bright Led.Max Temperature 87.6CHydraulic ControlDouble Tube Heat Dissipation6000K Pure WhiteLuminous Flux: 13600LMOptimize For Car and Bike15 Month  WarrantyCompatibility:Direct fit for all Cars by Suzuki or similar cars. (eg. Swift, Baleno, Wagon-R, Alto new, Ignis, Ciaz, Ertiga, Brezza, S-cross, XL6,  Celerio, Alto 800 etc.)Direct fit for other cars with 3 inches round fog lamp (eg. Ford Figo, Ecosport, Nexon, Compass, Amaze, Etios, City, Duster, etc. )For other cars, little alterations required with the clamp to get it fitted.Carhatke will support with fitment as well.Installation:Professional installation recommendedDirect connection with the fog lamp wire coming from the master wiring harness.For high beam, the high beam/ solenoid wires to be connected with headlight high beam wires.Or you may use a separate switch for the fog lamp high beam.Insulate every connecting point properly to avoid any technical or physical damage.Package Includes:2 x iPHCAR Projector Fog Lamp2 x Carhatke 130W Led Bulbs2 x Brackets2 x BallastsMounting ScrewsFog Light Wiring Kits & Couplers (Addon)Warranty:Carhatke 130W LED Comes with 15 Month Warranty.Note:1. If you want to keep the Wiring of this kit Separate from the Car’s electricals, simply use the Kit with Relay Harness...

If you are looking for luxury, stylish and waterproof car foot mat for your  Maruti New Ertiga 2018 then car 7D mat surely your first choice. A perfect combination of luxury, styling and maximum protection. 7d mat raised edges to cover the entire floor area and provide maximum protection from dust, oil, mud, water, and snow. These mats are 100% Environment-friendly. 7D mat has also a grass mat attached on the top surface to give the extra protection and make these mat easy wash and maintain. On the bottom side of the mat is covered with the Velcro sheet to make anti-slip. Very easy to install and maintain these mat wash anytime because mats are waterproof.  These 7d floor mats will be made with the best quality materials and also provide 7 depth layer protection.7 depth layers protections:Wire Loop - Non-slip, waterproof, noise reduction and antifouling to bear or endure dirty, protect the car interior.Heavy-duty vinyl backing - Makes it Anti Slip, Waterproof, Dust-proof, Protects stains, fading, dirt, Easy to clean.PU Leather - very little maintenance such as cleaning and wiping dirt and dust from its surface.Sponge - Shock and Sound Absorbent Inner Layer.Non-Woven Fabric - liquid repellence, resilience, stretch, softness, strength, flame retardancy, washability, cushioning, thermal insulation, acoustic insulation, filtration, use as a bacterial barrier and sterility.XPE - Heat Insulation: Shaping Capability, Sound Absorption, and Cushion Capability.Anti-Slip Bottom - Bottom Layer Keeps Mats in Place Without Harming Original Carpet.Installation: Before you start,  clean the carpet area with a vacuum cleaner so that there is no dust or debris under it. Now, take each mat and identify which mat would fit each side. And easily fit all matsWarranty: One Month Manufacturing Defect Warranty..

This auto mirror folding relay kit is only compatible with the Maruti Suzuki Car model. After installing this relay kit your side mirror will close automatically whenever you lock the door and it will automatically open whenever the ignition is on in your car. You don't have to cut any wire during the installation, but you might be wiretapped that you have used for the connection to the central locking system.Vehicle Compatibility Maruti Suzuki CarsSwift, Swift 18, Onwards.Swift Dzire, Dzire 17 Onwards.Ignis, Ciaz, S Cross.Ertiga, Ertiga 18 Onwards, XL6.Baleno, Baleno 2022 Onwards, Glanza.Brezza 2022 Onwards.Toyota Glanza.Wagon R.Fronx.Attention.This product is only used if your Car model side mirror folds from the manual button inside.If your car does not have the button inside to fold and unfold the mirror don't buy it.The side mirror should be electronic for using this relay.Operation.   1. Press the remote lock mirror folding.   2. Press the remote to unlock the mirror opening.Brief Installation of instruction. Find out the original car mirror folder switch.Separate plug to original car switch, use product's male plug connects to switch plug and product's female plug connect to wrings group.According to the following picture connect the line.How to find out the center lock motor positive line.Searching the wire at the center motor wires group, use the 12V test pencil on one end to connect to Grand, and the other end to touch the tested wire. Use the remote or key to press the lock.  At the moment of the center motor locking the test pencil will flash, this wire is the center lock motor positive line. Use our product pink wire to connect to it.How to find out the center unlock motor positive line.Searching the wire at the center motor wires group, use the 12V test pencil on one end to connect to Grand, and the other end touches the tested wire. Use the remote or key to press unlock. At the moment of center motor locking, the test pencil will flash, this wire is the center unlock motor positive line. Use our product gray wire to connect to it. +12V line.Off the car use the test pencil one end touches grand GND the other end touches the measuring line, if the test pencil lights this line is a +12V power line.User Instruction.1. Finish installation turn the engine ON, and make sure the original car mirror folding works normally.2. Turn off the engine and close the door. Press the remote then the side mirror folds automatically.3. Press the remote then the side mirror opens automatically.4. Turn the engine ON side mirrors open automatically...

Easy To Install 5 Min Setup and quick wiring. easy to adjust the position and cut the perfect size to match your car. Strong Build Build with high-quality flexible and durable polyUrethane Material for long-term use. Water-Resistant High-Density Waterproof Material ensures your led spoiler is protected from Wind/ Rain/ Snow and the elements. Easy Installation: Step 1 Measure the length of your trunk from trunk edge to trunk edge. Trim the spoiler size. Step 2 Rub the mounting area with the 3M Primer and let dry for 45 seconds. Step 3 Press the spoiler on the mounting area. Power the LED spoiler and find your vehicle's corresponding wiring.After Installation: Compatibility:-For All Cars, Sales Package:-1 x LED universal spoiler Product Warranty:-1 Month..

Try this custom fit door side beading cladding for enhance your vehicle exterior look. It protect your Car from damage your Car body and scratches. made  with high quality ABS plastic material with silver coated  metallic silver paint finish with Car logo emblem.100% imported accessories for your car. double side adhesive tape is attached on the back side of each piece that make your installation job very easy.Installation - Installation is very easy for this product, you just have to paste it on the side door of the bottom side. before paste it make sure surface is properly clean and 100% dry. Do not wash Car minimum two days after install this product for 100% Result...

Install this back bumper diffuser for your Car sporty look. perfectly fit your vehicle and very easy to install. This diffuser is only compatible for Maruti Suzuki Ertiga 2018 Model. The product is made out of fine abs plastic material...

High Quality Custom Fitted Front Grill Suzuki Logo For Maruti Suzuki New Ertiga 2018..

Clear Lens This iphcar projector fits 70% of the models, which is suitable for car better lighting and making your car high-end. Brightness Top Level Will not blind the oncoming vehicles, Be Safe Drive Safe with High-Quality Projector Lens. Original Product Easy to install, no damage to your car. Original iphcar has some original quality. Original iPH Projector Fog Light HousingHigh and low beam bi-xenon fog projector lights. Glass produced by curing system anti-scratching, anti-corrosion, fade-proof. High and low beam bi-xenon fog projector lights Two kinds of brackets for easy installations Top portion waterproof, because of high-selling Glass produced by curing system anti-scratching, anti-corrosion, fade-proofCompatibility:-Direct fit for all cars by Suzuki or similar cars. (eg. Swift, Baleno, Wagon-R, Alto new, Ignis, Ciaz, Ertiga, Brezza, S-cross, XL6, etc.)Direct fit for other cars with 3 inches round fog lamp (eg. Amaze, City, Figo, Aspire, Tiago, Tigor, Innova, Fortuner Nexon, Old Ecosport, Duster, Compass, Polo, Vento, WRV, etc. )For other cars, little alterations are required with the clamp to get it fitted. Installation: Professional installation recommendedDirect connection with the fog lamp wire coming from the master wiring harness.For high beam, the high beam/ solenoid wires to be connected with headlight high beam wires.Or you may use a separate switch for the fog lamp high beam.Insulate every connecting point properly to avoid any technical or physical damage.Carhatke will support with fitment as well. Compatibility:-Direct fit in most of the regular cars.Lens: 3.0 inches. Package Includes:-2 x iPH CAR Projector M612 2 x Brackets..

DRL is a daytime running light device placed on the front of the vehicle. These lights automatically turn on when the vehicle is in the drive. The purpose to install a DRL light in the vehicle is to provide extra visibility to your vehicle on the road so that other Car drivers and pedestrians can easily see your vehicle.DRL lights make your driving safer and reduce the collision from the pedestrians and other drivers. DRL lights also add style to your vehicle and make your vehicle looks bold. These DRL Lights are compatible with the Maruti Suzuki New Ertiga 2018 Onward.2 Function White in running, Yellow in turn signal.Package Includes - 2 DRL lights (Left-Right) & Wiring.Installation - These lights can be installed in any garage or any Car Accessories Shop...

Car chrome door handles come are in some high and luxury car models. Not every car maker company give you the chrome handles in their car model because of its cost factor. They keep handles in body color paint or plain black without body-color, if it is affecting your car look and you are getting bore from them, then you should add some styling material to your car exterior look. These chrome handles make very a big difference in your car exterior look, it adds a classy bold metallic look to your vehicle. installation is very simple of these chrome handle covers, you can install them by self. double side adhesive tape is attached to every piece.Note: This chrome handles compatible for Maruti Ertiga New all models like 1 keyhole, two keyholes and also with sensor handle model...

This trunk chrome steamer compatible only for maruti new Ertiga 2018 model. Build with ABS plastic material triple layered chrome finish. It add a classical look and appearance to your Car exterior. This trim install below of number plate steamer area .Installation - We recommend before installation process make sure your apply surface area is fully dry  and clean. Before pasting it you have to slightly heat apply surface area, you can use hair dryer to do this after that check the area to match the trim perfectly. then you should going paste it. do not wash your Car for 3 days after installation. Product HighlightsEasy to installed, double sided adhesive tape is attachedSuper fine import quality materialTriple layer chrome  finish to ensure give the maximum qualityEnhance your Car exterior look..

This interior wooden panel is compatible only for Maruti new ertiga 2018 model. it adds a premium look to your Car interior and upgrade your Car similar to the top variant. Total 8 pcs for every door...

This fog light chrome cover trims compatible only for maruti new Ertiga 2018 model. Build with ABS plastic material triple layered chrome finish. It add a classical look and appearance to your Car exterior. This trim install at your fog light out side area.Installation - We recommend before installation process make sure your apply surface area is fully dry  and clean. Before pasting it you have to slightly heat apply surface area, you can use hair dryer to do this after that check the area to match the trim perfectly. then you should going to paste it. do not wash your Car for 3 days after installation. Product HighlightsEasy to installed, double sided adhesive tape is attachedSuper fine import quality materialTriple layer chrome  finish to ensure give the maximum qualityEnhance your Car exterior look..