Mahindra XUV 300 Accessories

Optimize for All Cars The luminous point and the position of the chuck are the same height as the halogen lamp, perfect replacement. Great Visibility Adopting car-grade G-XP chip, 360-degree light emission, without any dark spots and blind areas, making driving safer. Minimization The Temperature Water Test to prove the manufacturing quality, you can put the LED bulb into the water and the LED light will keep lighting. Dual Heat Dissipation System The bulb is equipped with a fan, heat sink, liquid cooling tube, multiple heat dissipation, extend the life more 50,000 hours. Hydraulic Control Built-in decoding chip, greatly reducing the problem of flicker, error message and radio interference. Advanced Cooling Fan Imported COB lighting source low power consuming, Long life-span and Powerful anti-static performance If you expect a quality LED headlight bulb that is combined with high-quality, super brightness of 130 Watts and efficient heat dissipation, if you are worried about the error code when installing the bulb. Featuring with its outstanding triple cooling system and a high number of 130W 13,600LM . Carhatke LED headlight bulb provides you with a brighter light, better heat dissipation, longer lifespan and 99% compatibility. Canbus-Ready Design With an upgraded intelligent Canbus design, This Carhatke LED bulb is compatible with 99% of vehicles with no radio interference, no flicking or error code, preventing over-voltage and over-current protection function. Perfect Light Beam Pattern The flip chip inside the LED car bulb is perfectly positioned to fix the housing in the correct spot. This ensures the best light beam pattern with a perfect 45°cut-off line for low beam and super focused light for high beam. You can also rotate the light beam pattern with a 360°retainer. There’s no dark spot, no issue with blinding oncoming traffic. Led Specs:-Save Power: Consumers Only 130 Watts(65 Each)Color: 6000K Cool WhiteOperating Life: >30000hrsOperating Temperature: -40C ~+90CInput Power: 130W +10%Operating Voltage: DC 120-24VLuminous Flux: 13600LMIP Rate: IP68Light Source Model: G-XP x3 CustomizedHeat Dissipation: Aviation Aluminum 6063+Red copper+ Dual Heat Coducting Tubes Quick Specs:-Long Span LifeInstant StartHighest Light EfficiencyRain ResistantLow BeamHigh BeamImported COB LED Compatible:-H1H4H19H7H8/H11/H16H27/880/881HB4/9006HB3/90059012 Socket Types:-H1, H4, H7, H8/H11/H16, HB3/9005, HB4/ 9006, 9012, H27 Sales Package:-2x Light Bulbs Product Warranty:-15 Month Warranty By Carhatke.comWarranty:15 Month complete replacement warranty by carhatke.com if you facing any issue with led bulb just call us on our register contact number and we will replace your bulb within 7 Days...

The combo of iPH Projector with Carhatke 130W led that outperforms the stock headlights of the car. These fog lights come with high & low beam functions and are meant for those people who are looking for high-intensity lighting without affecting the visibility of oncoming drivers. Your search for the best intensity yet road legal fog lights ends here.Life Span of iPH CAR Projector Fog Lamp:Carhatke 130W Led is used in iPHCAR 3.0-inch Bi-Xenon Projector Fog Lamp, hence, it can deliver better performance for approx. 3 to 4 years, on driving 3-6 hours every day.About the Projector:Brand: iPHCAR, a well-known brand globallyMaterial: Shockproof Metal Housing for better lifespanQuality: Waterproof, Shockproof, DurableLens Size: 3.0 inch.NA WarrantyAbout 130W Led inside:True  130W  Super Bright Led.Max Temperature 87.6CHydraulic ControlDouble Tube Heat Dissipation6000K Pure WhiteLuminous Flux: 13600LMOptimize For Car and Bike15 Month  WarrantyCompatibility:Direct fit for all Cars by Suzuki or similar cars. (eg. Swift, Baleno, Wagon-R, Alto new, Ignis, Ciaz, Ertiga, Brezza, S-cross, XL6,  Celerio, Alto 800 etc.)Direct fit for other cars with 3 inches round fog lamp (eg. Ford Figo, Ecosport, Nexon, Compass, Amaze, Etios, City, Duster, etc. )For other cars, little alterations required with the clamp to get it fitted.Carhatke will support with fitment as well.Installation:Professional installation recommendedDirect connection with the fog lamp wire coming from the master wiring harness.For high beam, the high beam/ solenoid wires to be connected with headlight high beam wires.Or you may use a separate switch for the fog lamp high beam.Insulate every connecting point properly to avoid any technical or physical damage.Package Includes:2 x iPHCAR Projector Fog Lamp2 x Carhatke 130W Led Bulbs2 x Brackets2 x BallastsMounting ScrewsFog Light Wiring Kits & Couplers (Addon)Warranty:Carhatke 130W LED Comes with 15 Month Warranty.Note:1. If you want to keep the Wiring of this kit Separate from the Car’s electricals, simply use the Kit with Relay Harness...

Easy To Install 5 Min Setup and quick wiring. easy to adjust the position and cut the perfect size to match your car. Strong Build Build with high-quality flexible and durable polyUrethane Material for long-term use. Water-Resistant High-Density Waterproof Material ensures your led spoiler is protected from Wind/ Rain/ Snow and the elements. Easy Installation: Step 1 Measure the length of your trunk from trunk edge to trunk edge. Trim the spoiler size. Step 2 Rub the mounting area with the 3M Primer and let dry for 45 seconds. Step 3 Press the spoiler on the mounting area. Power the LED spoiler and find your vehicle's corresponding wiring.After Installation: Compatibility:-For All Cars, Sales Package:-1 x LED universal spoiler Product Warranty:-1 Month..

Clear Lens This iphcar projector fits 70% of the models, which is suitable for car better lighting and making your car high-end. Brightness Top Level Will not blind the oncoming vehicles, Be Safe Drive Safe with High-Quality Projector Lens. Original Product Easy to install, no damage to your car. Original iphcar has some original quality. Original iPH Projector Fog Light HousingHigh and low beam bi-xenon fog projector lights. Glass produced by curing system anti-scratching, anti-corrosion, fade-proof. High and low beam bi-xenon fog projector lights Two kinds of brackets for easy installations Top portion waterproof, because of high-selling Glass produced by curing system anti-scratching, anti-corrosion, fade-proofCompatibility:-Direct fit for all cars by Suzuki or similar cars. (eg. Swift, Baleno, Wagon-R, Alto new, Ignis, Ciaz, Ertiga, Brezza, S-cross, XL6, etc.)Direct fit for other cars with 3 inches round fog lamp (eg. Amaze, City, Figo, Aspire, Tiago, Tigor, Innova, Fortuner Nexon, Old Ecosport, Duster, Compass, Polo, Vento, WRV, etc. )For other cars, little alterations are required with the clamp to get it fitted. Installation: Professional installation recommendedDirect connection with the fog lamp wire coming from the master wiring harness.For high beam, the high beam/ solenoid wires to be connected with headlight high beam wires.Or you may use a separate switch for the fog lamp high beam.Insulate every connecting point properly to avoid any technical or physical damage.Carhatke will support with fitment as well. Compatibility:-Direct fit in most of the regular cars.Lens: 3.0 inches. Package Includes:-2 x iPH CAR Projector M612 2 x Brackets..

Window Car Door Visor Help to kept the window open in the light rain weather so that you can enjoy the rain. It also ensures that car window shields do not fog due to humidity. The door visor also prevents the direct sun rays on the side of the car. Apart from these Car Door Visors also enhance the exterior look of the car. The Door Visor also allows fresh air to naturally circulate through open windows while keeping the rain and wind out. Stylish Look Excellent design that enhances your car side profile look. Custom Fit Custom-fit design to ensure perfect fitting & size according to the specific vehicle model & brand. Comfort and Safety The door visor also deflects the wind, which reduces the noise outside of the car when you drive. Door Visor Easy Installation Step 1 Place the door visor on the window frame to check the position of pieces, before installation of door visor. Step 2 Clean and wipe properly apply surface area to make sure there was no dust, moisture, and water on the applied surface area. Step 3 Now remove the seal of the double-sided strong adhesive tape which is attached on the backside of every piece of the door visor. Step 4 Ensure accurate position, then press the product to make it tightly. Step 5 Do not wash your Car for 2-3 days after in material stacking window door visor. Step 6 You have all done now remove the blue-tinted wrapper from the chrome or silver line.   Compatibility:-For Mahindra Xuv 300 2019 Onward. Sales Package:- Set of 4 Door Visor. Product Warranty:-1 Month Manufacturing Defect Warranty. Note:-Showing pictures only for a material and quality purpose only, because this is a custom fit product, Actual product will send you according to your car model year and variant for best fitting...

Car chrome door handles come are in some high and luxury car models. Not every car maker company gives you the chrome handles bowl in their car model because of its cost factor. They keep handles in body color paint or plain black without body-color, if it is affecting your car look and you are getting bored from them, then you should add some styling material to your car exterior look. These chrome handles bowl make very a big difference in your car exterior look, it adds a classy bold metallic look to your vehicle. installation is very simple of these chrome handle covers, you can install them by yourself. double side adhesive tape is attached to every piece.Note: These chrome door handle bowl covers are compatible with Mahindra Xuv 300 2019 Onward...

Car chrome door handles come are in some high and luxury car models. Not every car maker company gives you the chrome handles in their car model because of its cost factor. They keep handles in body color paint or plain black without body-color, if it is affecting your car look and you are getting bored from them, then you should add some styling material to your car exterior look. These chrome handles make very a big difference in your car exterior look, it adds a classy bold metallic look to your vehicle. installation is very simple of these chrome handle covers, you can install them by yourself. double side adhesive tape is attached to every piece.Note: These chrome handles are compatible with Mahindra Xuv 300 2019 Onward all models like 1 keyhole, two keyholes, and also with sensor handle model...

This side mirror chrome cover is made with high-quality ABS plastic material with a triple-layer chrome finish. As it is a custom fit product the size is according to the new Innova Crysta Facelift 2021 Model. These covers will perfectly properly edge fit on Mahindra Xuv 300 2019 Onward. ..

DRL is a daytime running light device placed on the front of the vehicle. These lights automatically turn on when the vehicle is in the drive. The purpose to install a DRL light in the vehicle is to provide extra visibility to your vehicle on the road so that other Car drivers and pedestrians can easily see your vehicle.DRL lights make your driving safer and reduce the collision between pedestrians and other drivers. DRL lights also add style to your vehicle and make your vehicle looks bold. These DRL Lights are compatible with the Mahindra Xuv 300 2019 Onward.3 Function White in running, Yellow in turn signal & Fog Lamp.Package Includes - 2 DRL lights (Left-Right) & Wiring.Installation - These lights can be installed in any garage or any Car Accessories Shop...

DRL Lights is a daytime running light device paced on the front of the vehicle. These lights automatically turn on when the vehicle is in the drive. The purpose to install drl in the vehicle is to provide extra visibility to your vehicle on the road so that other Car drivers and pedestrians can easily see your vehicle. DRL lights make your driving safer and reduce the collision between pedestrians and other drivers. DRL lights also add style to your vehicle and make your vehicle looks bold. These DRL Lights are compatible with the Mahindra Xuv 300 2019 Onward...

Mahindra Xuv 300 2019 Onward OEM Type Front Grill Chrome Outer Trim..

If you are looking for luxury, stylish and waterproof car foot mat for your Hyundai Aura then car 7D mat surely your first choice. A perfect combination of luxury, styling and maximum protection. 7d mat raised edges to cover the entire floor area and provide maximum protection from dust, oil, mud, water, and snow. These mats are 100% Environment-friendly. 7D mat has also a grass mat attached on the top surface to give the extra protection and make these mat easy wash and maintain. On the bottom side of the mat is covered with the Velcro sheet to make anti-slip. Very easy to install and maintain these mat wash anytime because mats are 100% waterproof.  These 7d floor mats will be made with the best quality materials and also provide 7 depth layer protection.7 depth layers protections:Wire Loop - Non-slip, waterproof, noise reduction and antifouling to bear or endure dirty, protect the car interior.Heavy-duty vinyl backing - Makes it Anti Slip, Waterproof, Dust-proof, Protects stains, fading, dirt, Easy to clean.PU Leather - very little maintenance such as cleaning and wiping dirt and dust from its surface.Sponge - Shock and Sound Absorbent Inner Layer.Non-Woven Fabric - liquid repellence, resilience, stretch, softness, strength, flame retardancy, washability, cushioning, thermal insulation, acoustic insulation, filtration, use as a bacterial barrier and sterility.XPE - Heat Insulation: Shaping Capability, Sound Absorption, and Cushion Capability.Anti-Slip Bottom - Bottom Layer Keeps Mats in Place Without Harming Original Carpet.Installation: Before you start,  clean the carpet area with a vacuum cleaner so that there is no dust or debris under it. Now, take each mat and identify which mat would fit each side. And easily fit all matsWarranty: One Month Manufacturing Defect Warranty..

The scuff sill plate is used to protect the car door sill area from dust, rust, and scratches and also add some lighting effects to the vehicle. glowing scuff sill plate helps boarding or de-boarding to the car easier in dark places or nighttime. led footstep will automatically illuminate when the door will open and adding wow effect. Black Glossy Mirror Finish These footsteps are made of acrylic material to ensure the best result. Adhesive Tape Comes with company-fitted adhesive tape on the backside for the best result. High Quality LED Made with high quality imported led light for long term glow  and  made with acrylic material. Compatibility:-Mahindra XUV300. Sales Package:-Set Of 4 LED Scuff Sill Plate. Product Warranty:-15 Days Warranty. Installation::-Connect with the interior dome light, the light will automatically on whenever the door will open. You need additional wiring to require and we recommend don't try to install it yourself.Note:-Showing pictures only for a material and quality purpose only, because this is a custom fit product, Actual product will send you according to your car model year and variant for best fitting...

Reflector lights crafted by the superior ABS plastic material, especially for the Mahindra Xuv 300. Its exact fit and replace by old reflectors. Super bright led light used to glow over 5000 working hour life. Reflector lights are high-temperature resistance, waterproof, and shockproof. Dual function normal red in parking light and bright red when using the brake light. it adds more safety when you are driving as it allows for more visible your vehicle for long-distance especially when you are driving in rainy and foggy weather. 100% brand new product with good packaging. Reflector lights enhance your Car look. ..

The front and Back Bumper Guards are well-engineered. They protect your bumper top to bottom, fender to fender against minor bumps and scratches. Bumper protectors are designed to complement the sculpted lines of today’s luxury car. Anyone who parks on the street or in a parking garage can benefit from front and rear bumper protection. It protects the Front, Back, and Sides, Fog Lights Compatible, Very useful in hectic city traffic to avoid scratches and minor damages to your vehicle. Adds to the character & look of the vehicle. Does not interfere with the rear sensor operation. In some cases offers stepping pads to get in & out of the vehicle. Easy to install, no drilling required.Compatible For:- This Guard is only for the Mahindra XUV300 Model, please read the title carefully before buying it.Note: Product will ship from Transport you have to collect yourself from the transport. ..

These Seats Cover made of imported Austrian PU fabric to ensure the best quality result. The advanced machine used to stitch and finishing. This seat covers made on original pattern size will be 100% perfectly match to the Mahindra XUV300. These seat covers are fully bucketed to ensure getting the perfect fitting. Front Seat cover will be fully covered from the backside of the seats and also have a pocket where you can keep important things like documents, mobile charger and etc. Rear seats also will be fully covered from the backside. This seat cover comes in complete set with a front seat cover, rear seat cover, and headrest (if applicable in car). Seats cover 100% Waterproof highly durable.Installation - We did not provide the installation for any Car seat cover, we would like to recommend to get the installation from a professional as its save your time and also you will get the best result of the fitting.   Disclaimer - The image is the actual product though color may slightly differ from actual images. Note - Once you place the order you will be getting the call from our office to verify your order, vehicle color, and all details Or you can also call us at 8287647700 Between 11:00 AM To 6:00 PM.  After your confirmation in all, we dispatch your order...