Hyundai Car Accessories

The combo of iPH Projector with CrystalEye 120w led that outperforms the stock headlights of the car. These fog lights come with high & low beam functions and are meant for those people who are looking for high-intensity lighting without affecting the visibility of oncoming drivers. Your search for the best intensity yet road legal fog lights ends here.Life Span of iPH CAR Projector Fog Lamp:Crystal Eye 120w Led is used in iPHCAR 3.0-inch Bi-Xenon Projector Fog Lamp, hence, it can deliver better performance for approx. 3 to 4 years, on driving 3-5 hours every day.About the Projector:Brand: iPHCAR, a well-known brand globallyMaterial: Shockproof Metal Housing for better lifespanQuality: Waterproof, Shockproof, DurableLens Size: 3.0 inch.About 120W Led inside:Crystal Eye 120W Super Power LedComes with 120watts fast bright.Low voltage protection,Compatibility:Direct fit for all Cars by Suzuki or similar cars. (eg. Swift, Baleno, Wagon-R, Alto new, Ignis, Ciaz, Ertiga, Brezza, S-cross, XL6,  Celerio, Alto 800 etc.)Direct fit for other cars with 3 inches round fog lamp (eg. Ford Figo, Ecosport, Nexon, Compass, Amaze, Etios, City, Duster, etc. )For other cars, little alterations required with the clamp to get it fitted.Carhatke will support with fitment as well.Installation:Professional installation recommendedDirect connection with the fog lamp wire coming from the master wiring harness.For high beam, the high beam/ solenoid wires to be connected with headlight high beam wires.Or you may use a separate switch for the fog lamp high beam.Insulate every connecting point properly to avoid any technical or physical damage.Package Includes:2 x iPHCAR Projector Fog Lamp2 x CrystalEye 120w Led Bulbs2 x Brackets2 x BallastsMounting ScrewsWiring Kits & CouplersWarranty:Crystal Eye Led Comes with 1.3 Year Warranty.Note:1. If you want to keep the Wiring of this kit Separate from the Car’s electricals, simply use the Kit with Relay Harness...

The combo of iPHCAR Bi-Xenon 3inch Projector with CrystalEye HID conversion kit that outperforms the stock headlights of the car. These fog lights come with high & low beam functions and are meant for those people who are looking for high-intensity lighting without affecting the visibility of oncoming drivers. Your search for the best intensity yet road legal fog lights ends here.Life Span of iPH CAR Projector Fog Lamp:Crystal Eye HID bulb is used in iPHCAR 3.0-inch Bi-Xenon Projector Fog Lamp, hence, it can deliver better performance for approx. 3 to 4 years, on driving 3 hours every day.About the Projector:Brand: iPHCAR, a well-known brand globallyMaterial: Shockproof Metal Housing for better lifespanQuality: Waterproof, Shockproof, DurableLens: 3.0 inch.Fitment Procedure: Direct fit in most of the regular cars.About HID conversion Kit inside:Crystal Eye High-Intensity HID Conversion KitComes with 55 watts fast bright ballast for each HID bulb.3 times brighter than Halogen.Low voltage protection,6000K, 5500K & 4300K Color Temperature OptionsUp to 5000 hours life span for better performance.IP6812V DC Current9000LMCompatibility:Direct fit for all Cars by Suzuki or similar cars. (eg. Swift, Baleno, Wagon-R, Alto new, Ignis, Ciaz, Ertiga, Brezza, S-cross, XL6,  Celerio, Alto 800 etc.)Direct fit for other cars with 3 inches round fog lamp (eg. Ford Figo, Ecosport, Nexon, Compass, Amaze, Etios, City, Duster, etc. )For other cars, little alterations required with the clamp to get it fitted.Carhatke will support with fitment as well.Installation:Professional installation recommendedDirect connection with the fog lamp wire coming from the master wiring harness.For high beam, the high beam/ solenoid wires to be connected with headlight high beam wires.Or you may use a separate switch for the fog lamp high beam.Insulate every connecting point properly to avoid any technical or physical damage.Package Includes:2 x iPHCAR Projector Fog Lamp2 x CrystalEye HID Bulbs2 x Brackets2 x BallastsMounting ScrewsWiring Kits & CouplersWarranty:HID Kit Comes with 1 Year Warranty.Note:1. If you want to keep the Wiring of this kit Separate from the Car’s electricals, simply use the Kit with Relay Harness.2. For cars with canBUS electrical system (eg.Volkswagen, Skoda, Ford, Jeep) We Recommend CanBUS Based HID.)..

..

7D Custom Fitted Boot Trunk Diggy Mat For Hyundai New Creta 2018..

If you are looking for luxury, stylish and waterproof car foot mat for your Hyundai Tucson 2016-2020 then car 7D mat surely your first choice. A perfect combination of luxury, styling and maximum protection. 7d mat raised edges to cover the entire floor area and provide maximum protection from dust, oil, mud, water, and snow. These mats are 100% Environment-friendly. 7D mat has also a grass mat attached on the top surface to give the extra protection and make these mat easy wash and maintain. On the bottom side of the mat is covered with the Velcro sheet to make anti-slip. Very easy to install and maintain these mat wash anytime because mats are waterproof.  These 7d floor mats will be made with the best quality materials and also provide 7 depth layer protection.7 depth layers protections:Wire Loop - Non-slip, waterproof, noise reduction and antifouling to bear or endure dirty, protect the car interior.Heavy-duty vinyl backing - Makes it Anti Slip, Waterproof, Dust-proof, Protects stains, fading, dirt, Easy to clean.PU Leather - very little maintenance such as cleaning and wiping dirt and dust from its surface.Sponge - Shock and Sound Absorbent Inner Layer.Non-Woven Fabric - liquid repellence, resilience, stretch, softness, strength, flame retardancy, washability, cushioning, thermal insulation, acoustic insulation, filtration, use as a bacterial barrier and sterility.XPE - Heat Insulation: Shaping Capability, Sound Absorption, and Cushion Capability.Anti-Slip Bottom - Bottom Layer Keeps Mats in Place Without Harming Original Carpet.Installation: Before you start,  clean the carpet area with a vacuum cleaner so that there is no dust or debris under it. Now, take each mat and identify which mat would fit each side. And easily fit all matsWarranty: One Month Manufacturing Defect Warranty..

If you are looking for luxury, stylish and waterproof car foot mat for your Hyundai Tucson 2020 Onwards then car 7D mat surely your first choice. A perfect combination of luxury, styling and maximum protection. 7d mat raised edges to cover the entire floor area and provide maximum protection from dust, oil, mud, water, and snow. These mats are 100% Environment-friendly. 7D mat has also a grass mat attached on the top surface to give the extra protection and make these mat easy wash and maintain. On the bottom side of the mat is covered with the Velcro sheet to make anti-slip. Very easy to install and maintain these mat wash anytime because mats are waterproof.  These 7d floor mats will be made with the best quality materials and also provide 7 depth layer protection.7 depth layers protections:Wire Loop - Non-slip, waterproof, noise reduction and antifouling to bear or endure dirty, protect the car interior.Heavy-duty vinyl backing - Makes it Anti Slip, Waterproof, Dust-proof, Protects stains, fading, dirt, Easy to clean.PU Leather - very little maintenance such as cleaning and wiping dirt and dust from its surface.Sponge - Shock and Sound Absorbent Inner Layer.Non-Woven Fabric - liquid repellence, resilience, stretch, softness, strength, flame retardancy, washability, cushioning, thermal insulation, acoustic insulation, filtration, use as a bacterial barrier and sterility.XPE - Heat Insulation: Shaping Capability, Sound Absorption, and Cushion Capability.Anti-Slip Bottom - Bottom Layer Keeps Mats in Place Without Harming Original Carpet.Installation: Before you start,  clean the carpet area with a vacuum cleaner so that there is no dust or debris under it. Now, take each mat and identify which mat would fit each side. And easily fit all matsWarranty: One Month Manufacturing Defect Warranty..

This auto mirror folding relay kit is only compatible with the Hyundai Creta model. after installing this relay kit your side mirror will be closed automatically whenever you lock the door and it will automatically open whenever ignition on in your car. you don't have to cut any wire during the installation, but you might be wiretapped that you have used for the connection to the central locking system.Attention!: This product is only used if your Car model side mirror folds from the manual button inside.If your car does not have the button inside to fold and unfold the mirror so don't buy it.The side mirror should be electronic for using this relay.Car Rearview Mirror Folding Manual For Hyundai Creta: Operation:   1. -- Press remote lock '.  mirror folding.   2. -- Press remote unlock mirror opening1.Brief Installation on instruction Find out the original car mirror folder switch.Separate plug to original car switch, use product's male plug connects to switch plug and product's female plug connect to wrings group.According to the following picture to connect the line.How to find out the center lock motor positive line):Searching the wire at the center motor wires group, use the 12V test pencil one end to connect to Grand the other end to touch the tested wire. Use remote or key to press "lock". At the moment of center motor locking the test pencil will flash, this wire is [center lock motor positive line]. Use our product pink wire to connect to it.How to find out the center unlock motor positive line):Searching the wire at the center motor wires group, use the 12V test pencil one end to connect to Grand.  The other end to touch the tested wire. Use remote or key to press "unlock. At the moment of center motor locking, the test pencil will flash, this wire Is (center unlock motor positive line) Use our product gray wire to connect to it. * + 12V line:Off the car use test pencil one end touch grand {GND the other end touch measuring line If test pencil light this line is + 12V power lineUser Instruction:1.Finish installation. turn engine to ON, make sure original car mirror folding work normally.2. Turn off the engine. close door. press the remote then side mirror fold automatically.3. Press the remote then the side mirror opens automatically.4. Turn engine to ON side mirrors opens automatically...

This auto mirror folding relay kit is only compatible with the Hyundai Creta Facelift 2018-2020. After installing this relay kit your side mirror will be closed automatically whenever you lock the door and it will automatically open whenever ignition on in your car. you don't have to cut any wire during the installation, but you might be wiretapped that you have used for the connection to the central locking system.Attention!: This product is only used if your Car model side mirror folds from the manual button inside.If your car does not have the button inside to fold and unfold the mirror so don't buy it.The side mirror should be electronic for using this relay.Car Rearview Mirror Folding Manual For Hyundai Creta: Operation:   1. -- Press remote lock '.  mirror folding.   2. -- Press remote unlock mirror opening1.Brief Installation on instruction Find out the original car mirror folder switch.Separate plug to original car switch, use product's male plug connects to switch plug and product's female plug connect to wrings group.According to the following picture to connect the line.How to find out the center lock motor positive line):Searching the wire at the center motor wires group, use the 12V test pencil one end to connect to Grand the other end to touch the tested wire. Use remote or key to press "lock". At the moment of center motor locking the test pencil will flash, this wire is [center lock motor positive line]. Use our product pink wire to connect to it.How to find out the center unlock motor positive line):Searching the wire at the center motor wires group, use the 12V test pencil one end to connect to Grand.  The other end to touch the tested wire. Use remote or key to press "unlock. At the moment of center motor locking, the test pencil will flash, this wire Is (center unlock motor positive line) Use our product gray wire to connect to it. * + 12V line:Off the car use test pencil one end touch grand {GND the other end touch measuring line If test pencil light this line is + 12V power lineUser Instruction:1.Finish installation. turn engine to ON, make sure original car mirror folding work normally.2. Turn off the engine. close door. press the remote then side mirror fold automatically.3. Press the remote then the side mirror opens automatically.4. Turn engine to ON side mirrors opens automatically...

This Auto mirror folding relay kit is only compatible with the Hyundai Venue. After installing this relay kit your side mirror will be closed automatically whenever you lock the door and it will automatically open whenever ignition is on in your car. you don't have to cut any wire during the installation, but you might be wiretapped that you have used for the connection to the central locking system.Attention!: This product is only used if your Car model side mirror folds from the manual button inside.If your car does not have the button inside to fold and unfold the mirror so don't buy it.The side mirror should be electronic for using this relay.Car Rearview Mirror Folding Manual For Hyundai Venue: Operation:   1. -- Press remote lock '.  mirror folding.   2. -- Press remote unlock mirror opening1. Brief Installation on instruction Find out the original car mirror folder switch.Separate plug to original car switch, use product's male plug connects to switch plug and product's female plug connect to wrings group.According to the following picture to connect the line.How to find out the center lock motor positive line):Searching the wire at the center motor wires group, use the 12V test pencil one end to connect to Grand the other end to touch the tested wire. Use remote or key to press "lock". At the moment of center motor locking the test pencil will flash, this wire is [center lock motor positive line]. Use our product pink wire to connect to it.How to find out the center unlock motor positive line):Searching the wire at the center motor wires group, use the 12V test pencil one end to connect to Grand.  The other end to touch the tested wire. Use remote or key to press "unlock. At the moment of center motor locking, the test pencil will flash, this wire Is (center unlock motor positive line) Use our product gray wire to connect to it. * + 12V line:Off the car use test pencil one end touch grand {GND the other end touch measuring line If test pencil light this line is + 12V power lineUser Instruction:1. Finish the installation. turn the engine to ON, make sure the original car mirror folding work normally.2. Turn off the engine. close door. press the remote then side mirror fold automatically.3. Press the remote then the side mirror opens automatically.4. Turn engine to ON side mirrors opens automatically...

This Auto mirror folding relay kit is only compatible with the Hyundai Xcent. After installing this relay kit your side mirror will be closed automatically whenever you lock the door and it will automatically open whenever ignition on in your car. you don't have to cut any wire during the installation, but you might be wiretapped that you have used for the connection to the central locking system.Attention!: This product is only used if your Car model side mirror folds from the manual button inside.If your car does not have the button inside to fold and unfold the mirror so don't buy it.The side mirror should be electronic for using this relay.Car Rearview Mirror Folding Manual For Hyundai Xcent: Operation:   1. -- Press remote lock '.  mirror folding.   2. -- Press remote unlock mirror opening1. Brief Installation on instruction Find out the original car mirror folder switch.Separate plug to original car switch, use product's male plug connects to switch plug and product's female plug connect to wrings group.According to the following picture to connect the line.How to find out the center lock motor positive line):Searching the wire at the center motor wires group, use the 12V test pencil one end to connect to Grand the other end to touch the tested wire. Use remote or key to press "lock". At the moment of center motor locking the test pencil will flash, this wire is [center lock motor positive line]. Use our product pink wire to connect to it.How to find out the center unlock motor positive line):Searching the wire at the center motor wires group, use the 12V test pencil one end to connect to Grand.  The other end to touch the tested wire. Use remote or key to press "unlock. At the moment of center motor locking, the test pencil will flash, this wire Is (center unlock motor positive line) Use our product gray wire to connect to it. * + 12V line:Off the car use test pencil one end touch grand {GND the other end touch measuring line If test pencil light this line is + 12V power lineUser Instruction:1. Finish the installation. turn the engine to ON, make sure the original car mirror folding work normally.2. Turn off the engine. close door. press the remote then side mirror fold automatically.3. Press the remote then the side mirror opens automatically.4. Turn engine to ON side mirrors opens automatically...

Window door visors are prevent the Car from rain, dust and pollution outside and also circulate the air. Door visor also block the sun rays from side and make comfortable driving to experience . They Reduce Noise from outside when you driving in high speed. Rain door visor also beautify your Car exterior as well...