Toyota Innova Hycross 2023 Onwards Accessories

Optimize for All Cars The luminous point and the position of the chuck are the same height as the halogen lamp, perfect replacement. Great Visibility Adopting car-grade G-XP chip, 360-degree light emission, without any dark spots and blind areas, making driving safer. Minimization The Temperature Water Test to prove the manufacturing quality, you can put the LED bulb into the water and the LED light will keep lighting. Dual Heat Dissipation System The bulb is equipped with a fan, heat sink, liquid cooling tube, multiple heat dissipation, extend the life more 50,000 hours. Hydraulic Control Built-in decoding chip, greatly reducing the problem of flicker, error message and radio interference. Advanced Cooling Fan Imported COB lighting source low power consuming, Long life-span and Powerful anti-static performance If you expect a quality LED headlight bulb that is combined with high-quality, super brightness of 130 Watts and efficient heat dissipation, if you are worried about the error code when installing the bulb. Featuring with its outstanding triple cooling system and a high number of 130W 13,600LM . Carhatke LED headlight bulb provides you with a brighter light, better heat dissipation, longer lifespan and 99% compatibility. Canbus-Ready Design With an upgraded intelligent Canbus design, This Carhatke LED bulb is compatible with 99% of vehicles with no radio interference, no flicking or error code, preventing over-voltage and over-current protection function. Perfect Light Beam Pattern The flip chip inside the LED car bulb is perfectly positioned to fix the housing in the correct spot. This ensures the best light beam pattern with a perfect 45°cut-off line for low beam and super focused light for high beam. You can also rotate the light beam pattern with a 360°retainer. There’s no dark spot, no issue with blinding oncoming traffic. Led Specs:-Save Power: Consumers Only 130 Watts(65 Each)Color: 6000K Cool WhiteOperating Life: >30000hrsOperating Temperature: -40C ~+90CInput Power: 130W +10%Operating Voltage: DC 120-24VLuminous Flux: 13600LMIP Rate: IP68Light Source Model: G-XP x3 CustomizedHeat Dissipation: Aviation Aluminum 6063+Red copper+ Dual Heat Coducting Tubes Quick Specs:-Long Span LifeInstant StartHighest Light EfficiencyRain ResistantLow BeamHigh BeamImported COB LED Compatible:-H1H4H19H7H8/H11/H16H27/880/881HB4/9006HB3/90059012 Socket Types:-H1, H4, H7, H8/H11/H16, HB3/9005, HB4/ 9006, 9012, H27 Sales Package:-2x Light Bulbs Product Warranty:-15 Month Warranty By Carhatke.comWarranty:15 Month complete replacement warranty by carhatke.com if you facing any issue with led bulb just call us on our register contact number and we will replace your bulb within 7 Days...

These fog lights are only compatible with the Toyota Hycross 2023 Onwards. It is an OEM type of fog lamp that perfectly fits into your car, you don't need any alteration in your Car body, just remove the existing fog cover and fix it. wiring will be very simple because it is a plug-and-play type socket-to-socket fitting, to ensure your warranty will not lapse. you will get the two fog lamps & nuts in the box. The chrome inside is made with PPS. The lens is PC with UV Coating Process. DLAA Use Own Brand High Quality And Long Life Time Halogen Bulbs, When Matching With Reflector, It Will Have Very Good Fog Light Beam Performance. It Can Keep The Air Pressure Inside And Outside The Lamp In Balance And It Can Also Filter Out Water From Large Molecules. Water Cannot Get Into The Lamp And The Moisture Can Be Removed Out Of The Lamp...

These scuff sill plates are only compatible with Toyota Hycross 2023 Onwards. Sill plates sometimes we call scuff plates or sill guards, The sill plate is used to protect your car's interior door sills from scratches. This sill plate is built with fine SS material and also your car name logo is a mask for enhancing the look of your car. It is very easy to install because double-sided adhesive tape is attached to the backside. Installation process you can do by yourself also...

Car chrome door handles come in some high and luxury car models. Not every car maker company gives you chrome handles in their car model because of its cost factor. They keep handles in body color paint or plain black without body color, if it is affecting your car look and you are getting bored with them, then you should add some styling material to your car exterior look. These chrome handles make very a big difference in your car's exterior look, it adds a classy bold metallic look to your vehicle. installation is very simple for these chrome handle covers, you can install them by yourself. double side adhesive tape is attached to every piece.Note: These chrome handles are compatible with Toyota Hycross 2023 Onwards...

These lower window chrome garnishes are made out of stainless steel material with a triple-layer chrome finish. The purpose to the install this chrome garnish trim is to enhance the car's side profile look and add some metal finish look to the vehicle. Installation is very easy, double-sided tape is attached on the backside of each piece so that you can install it by yourself, but professional installation would be preferred for the best result. Do not wash your car for 3-4 days after the installation of this garnish. Lower Window Garnish also known as Lower Window Chrome,Compatible For:- This Lower Window Garnish is only for the Toyota Hycross 2023 Onwards,  please read the title carefully before buying it.In The Box: Set of 6 Pcs ..

This tail light chrome cover is compatible only with Toyota Innova Hycroos 2023 Onwards. Build with ABS plastic material triple-layered chrome finish. It adds a classical look and appearance to your Car exterior. This trim install is below of number plate steamer area.Installation - We recommend before the installation process make sure your apply surface area is fully dry and clean. Before pasting it you have to slightly heat apply the surface area, you can use a hairdryer to do this after that check the area to match the trim perfectly. then you should be going to paste it. do not wash your Car for 3 days after installation...

Install this chrome combo kit in your Toyota Hycross 2023 Onwards to enhance the exterior look of your vehicle. If you feel that all exterior area looks like plastic then you can these chrome trims to add a metallic look. Made with ABS unbreakable plastic material with triple-layer chrome finishes. This combo kit includes a total of 10 Pieces. every piece has double-sided tape attached on the backside for sticking purposes. The product is 100% Imported and will have a proper edge-to-edge fitting. We recommended before sticking any pieces of chrome garnish please match properly apply area and match the piece on it then only remove the adhesive tape which is attached to the backside and paste it.Installation is very easy for the combo kit, you don't need to require screwing and drilling just match the pieces to the application area and paste it. Before installing or pasting any chrome garnish make sure that apply area is fully dry and clean properly, if any oil, water, and dust particle on the applied surface area will not stick and be pressed properly.  Do not wash your for a minimum of 3-4 days after installing this combo kit. All reference image is available which make your installation job easy. Package included list.ORVM Cover - 2 Pcs.Handle Cover - 4 Pcs.Eye Cat Garnish - 2 Pcs.Tail Lamp Garnish - 4 Pcs...

This trunk chrome steamer compatible only for Toyota Hycross model. Build with ABS plastic material triple layered chrome finish. It add a classical look and appearance to your Car exterior. This trim install below of number plate steamer area .Installation - We recommend before installation process make sure your apply surface area is fully dry  and clean. Before pasting it you have to slightly heat apply surface area, you can use hair dryer to do this after that check the area to match the trim perfectly. then you should going paste it. do not wash your Car for 3 days after installation...

This trunk chrome steamer compatible only for Toyota Hycross model. Build with ABS plastic material triple layered chrome finish. It add a classical look and appearance to your Car exterior. This trim install below of number plate steamer area .Installation - We recommend before installation process make sure your apply surface area is fully dry  and clean. Before pasting it you have to slightly heat apply surface area, you can use hair dryer to do this after that check the area to match the trim perfectly. then you should going paste it. do not wash your Car for 3 days after installation...

These lower window black chrome garnishes are made out of stainless steel material with a triple-layer chrome finish. The purpose to the install this black chrome garnish trim is to enhance the car's side profile look and add some metal finish look to the vehicle. Installation is very easy, double-sided tape is attached on the backside of each piece so that you can install it by yourself, but professional installation would be preferred for the best result. Do not wash your car for 3-4 days after the installation of this garnish. Lower Window Garnish also known as Lower Window Chrome,Compatible For:- This Lower Window Garnish is only for the Toyota Hycross 2023 Onwards, Please read the title carefully before buying it.In The Box: Set of 6 Pcs ..

For Lovers Enjoy the romantic atmosphere in your Car with your lover tonight. It appears infinite DIY colors with adjustable brightness/speed/pattern. App Control & 16 Million Colors The Car Interior Trim Light Strip uses a wireless “Lotus Lantern” APP for control suitable for IOS or Andriod. personalize the car interior space. Wireless RF Remote Wireless Music Remote Control enables you to change the color and adjust the brightness as you wish, also the Sound-activated Function allows you to enjoy the fun with the color changing. Light Mode:1) Sound Active Effects: The LED under car glow system is equipped with sound sensors that let the LED lights synchronized with the music beat. The LED music light strip follows the beat and adjusts flashing to fit the strength of the sound.2) Music Decoration: The Kit designed to be simple, yet also provides elegance inside the car when driving at night or enjoying music. And because it has a sound sensor, the under-car glow system synchronizes with the music beat.3) Fall Asleep Mode: The Led light will have fall asleep mode. This mode can automatically change dark brightness to provide a good sleep atmosphere.4) Brightness Color Temperature Adjustment: The LED is equipped with brightness color temperature adjustment mode. When you feel the light is dark, you can use this mode to change brightness. Easy Installation Step 1 Pass the optical fiber through the transparent tube. Put the transparent tube into the gap. Cut according to the length of the installation position. Step 2 Connect the optical fiber to the LED and tighten the screws.Hide wires and LEDs. Step 3 If apart car door: Hide it in the car door or center console and instrument panel. App Connection Steps: Step 1 Scan the QR code on the control box or search for “Lotus Lantern” in the app store. Step 2 Turn on your phone Bluetooth. Step 3 Open the APP and connect the light. Note:-1. If you face the issue of lights not connecting/working via the Bluetooth app, please troubleshoot with these two steps.2) Please open the APP and on the upper left corner, please click into the “Groups” Button (on the left of “Color” Button), there is a “Refresh” button, please click it and refresh the APP, and then it will show 1 device 1 connected. It means the connection is successful.3) If step 1 can’t solve the problem, please keep the Bluetooth and strip lights on and EXIT the APP, and then restart the APP "Lotus Lantern", and try to connect your phone again. Compatibility:-For All Cars, Sales Package:-5 in 1 RGB LED Strip Light Kit1 x Optic Fiber (236inch)1 x PVC Transparent Tube(236inch)1 x Remote Product Warranty:-1 Month..

This reflector chrome trims compatible only for Toyota Hycross model. Build with ABS plastic material triple layered chrome finish. It add a classical look and appearance to your Car exterior. This trim install at your back bumper reflector out side area.Installation - We recommend before installation process make sure your apply surface area is fully dry  and clean. Before pasting it you have to slightly heat apply surface area, you can use hair dryer to do this after that check the area to match the trim perfectly. then you should going paste it. do not wash your Car for 3 days after installation...

This magnetic sunshade protects you from unwanted heat and sun glare. Magnetic sunshades are custom-fit sunshades that ensure exact size and match according to the car model. Magnets are used on the edges for easy installation. you just have to open your car door and place the sunshade closer to the window frame on it and it will automatically stick on the frame. No professional skills required to install it. The magnet also provides security when you down your window glass at high speed. This magnetic sunshade keeps your car interior cool inside and increase your AC performance in hot weather. front two sunshades have the zip option that can open some space of shades where you can easily throw unwanted things outside from your car. ..

The touch will change to the light and the 7-color light will automatically convert it. The K9 crystal three-dimensional multi-faceted cutting technology makes the material hard and wear-resistant.Built-in long efficient rechargeable battery (can be charged for about 20 days at a time). To install, simply twist, loosen and remove the shift knob and replace it. Note: Suitable for models without buttons on AT gearhead- not suitable for MT manual car.Note: This gear knob is only compatible with Manual Transmission...

Install these chrome finish Toyota Innova Hycross front grill ornaments to add a bold look to your vehicle. these ornaments are made out of high-quality ABS plastic material with a triple-layer chrome finish. 4 pieces with the perfect size and edge-to-edge fitting. If your model is not the top variant you can install these chrome rings and you can get the same look as a top model...

If you are looking for a luxury, stylish, and waterproof car foot mat for your Toyota Hycross. then car 7D mat is surely your first choice. A perfect combination of luxury, styling, and maximum protection. 7d mat-raised edges cover the entire floor area and provide maximum protection from dust, oil, mud, water, and snow. These mats are 100% Environment-friendly. 7D mat has also a grass mat attached on the top surface to give the extra protection and make these mat easy wash and maintain. The bottom side of the mat is covered with a Velcro sheet to make it anti-slip. Very easy to install and maintain these mats wash anytime because mats are 100% waterproof.  These 7d floor mats will be made with the best quality materials and also provide 7-depth layer protection.7 depth layers protections:Wire Loop - Non-slip, waterproof, noise reduction, and antifouling to bear or endure dirty, protect the car interior.Heavy-duty vinyl backing - Makes it Anti Slip, Waterproof, Dust-proof, Protects stains, fading, dirt, Easy to clean.PU Leather - very little maintenance such as cleaning and wiping dirt and dust from its surface.Sponge - Shock and Sound Absorbent Inner Layer.Non-Woven Fabric - liquid repellence, resilience, stretch, softness, strength, flame retardancy, washability, cushioning, thermal insulation, acoustic insulation, filtration, use as a bacterial barrier, and sterility.XPE - Heat Insulation: Shaping Capability, Sound Absorption, and Cushion Capability.Anti-Slip Bottom - Bottom Layer Keeps Mats in Place Without Harming the Original Carpet.Installation: Before you start,  clean the carpet area with a vacuum cleaner so that there is no dust or debris under it. Now, take each mat and identify which mat would fit each side. And easily fit all matsWarranty: One Month Manufacturing Defect Warranty..

Toyota Innova Hycross 2023 Onwards Body Side Moulding - 4 Pieces..