Toyota Fortuner 2016-2020 Accessories

Optimize for All Cars The luminous point and the position of the chuck are the same height as the halogen lamp, perfect replacement. Great Visibility Adopting car-grade G-XP chip, 360-degree light emission, without any dark spots and blind areas, making driving safer. Minimization The Temperature Water Test to prove the manufacturing quality, you can put the LED bulb into the water and the LED light will keep lighting. Dual Heat Dissipation System The bulb is equipped with a fan, heat sink, liquid cooling tube, multiple heat dissipation, extend the life more 50,000 hours. Hydraulic Control Built-in decoding chip, greatly reducing the problem of flicker, error message and radio interference. Advanced Cooling Fan Imported COB lighting source low power consuming, Long life-span and Powerful anti-static performance If you expect a quality LED headlight bulb that is combined with high-quality, super brightness of 130 Watts and efficient heat dissipation, if you are worried about the error code when installing the bulb. Featuring with its outstanding triple cooling system and a high number of 130W 13,600LM . Carhatke LED headlight bulb provides you with a brighter light, better heat dissipation, longer lifespan and 99% compatibility. Canbus-Ready Design With an upgraded intelligent Canbus design, This Carhatke LED bulb is compatible with 99% of vehicles with no radio interference, no flicking or error code, preventing over-voltage and over-current protection function. Perfect Light Beam Pattern The flip chip inside the LED car bulb is perfectly positioned to fix the housing in the correct spot. This ensures the best light beam pattern with a perfect 45°cut-off line for low beam and super focused light for high beam. You can also rotate the light beam pattern with a 360°retainer. There’s no dark spot, no issue with blinding oncoming traffic. Led Specs:-Save Power: Consumers Only 130 Watts(65 Each)Color: 6000K Cool WhiteOperating Life: >30000hrsOperating Temperature: -40C ~+90CInput Power: 130W +10%Operating Voltage: DC 120-24VLuminous Flux: 13600LMIP Rate: IP68Light Source Model: G-XP x3 CustomizedHeat Dissipation: Aviation Aluminum 6063+Red copper+ Dual Heat Coducting Tubes Quick Specs:-Long Span LifeInstant StartHighest Light EfficiencyRain ResistantLow BeamHigh BeamImported COB LED Compatible:-H1H4H19H7H8/H11/H16H27/880/881HB4/9006HB3/90059012 Socket Types:-H1, H4, H7, H8/H11/H16, HB3/9005, HB4/ 9006, 9012, H27 Sales Package:-2x Light Bulbs Product Warranty:-15 Month Warranty By Carhatke.comWarranty:15 Month complete replacement warranty by carhatke.com if you facing any issue with led bulb just call us on our register contact number and we will replace your bulb within 7 Days...

The combo of iPH Projector with Carhatke 130W led that outperforms the stock headlights of the car. These fog lights come with high & low beam functions and are meant for those people who are looking for high-intensity lighting without affecting the visibility of oncoming drivers. Your search for the best intensity yet road legal fog lights ends here.Life Span of iPH CAR Projector Fog Lamp:Carhatke 130W Led is used in iPHCAR 3.0-inch Bi-Xenon Projector Fog Lamp, hence, it can deliver better performance for approx. 3 to 4 years, on driving 3-6 hours every day.About the Projector:Brand: iPHCAR, a well-known brand globallyMaterial: Shockproof Metal Housing for better lifespanQuality: Waterproof, Shockproof, DurableLens Size: 3.0 inch.NA WarrantyAbout 130W Led inside:True  130W  Super Bright Led.Max Temperature 87.6CHydraulic ControlDouble Tube Heat Dissipation6000K Pure WhiteLuminous Flux: 13600LMOptimize For Car and Bike15 Month  WarrantyCompatibility:Direct fit for all Cars by Suzuki or similar cars. (eg. Swift, Baleno, Wagon-R, Alto new, Ignis, Ciaz, Ertiga, Brezza, S-cross, XL6,  Celerio, Alto 800 etc.)Direct fit for other cars with 3 inches round fog lamp (eg. Ford Figo, Ecosport, Nexon, Compass, Amaze, Etios, City, Duster, etc. )For other cars, little alterations required with the clamp to get it fitted.Carhatke will support with fitment as well.Installation:Professional installation recommendedDirect connection with the fog lamp wire coming from the master wiring harness.For high beam, the high beam/ solenoid wires to be connected with headlight high beam wires.Or you may use a separate switch for the fog lamp high beam.Insulate every connecting point properly to avoid any technical or physical damage.Package Includes:2 x iPHCAR Projector Fog Lamp2 x Carhatke 130W Led Bulbs2 x Brackets2 x BallastsMounting ScrewsFog Light Wiring Kits & Couplers (Addon)Warranty:Carhatke 130W LED Comes with 15 Month Warranty.Note:1. If you want to keep the Wiring of this kit Separate from the Car’s electricals, simply use the Kit with Relay Harness...

Waterproof, top quality metal made 3D sticker, 100% brand new, looks creative and cool. With strong 3M adhesive tape, easy to install, removable.Installation: You Must Make Sure You Will Install Emblem On a Flat Position Because The Emblem Back is Flat, Do Not Paste on Curve Surface Adhesive Tape is on Back, Easy to Decorate Your Car. Just Clean the Surface of Your Car Before Pasting Satisfaction GuaranteedPackage Content: 1 Pc Toyota Racing Development TRD Metal Badge Emblem..

Waterproof, top quality metal made 3D sticker, 100% brand new, looks creative and cool. With strong 3M adhesive tape, easy to install, removable.Installation: You Must Make Sure You Will Install Emblem On a Flat Position Because The Emblem Back is Flat, Do Not Paste on Curve Surface Adhesive Tape is on Back, Easy to Decorate Your Car. Just Clean the Surface of Your Car Before Pasting Satisfaction GuaranteedPackage Content: 1 Pc Toyota Racing Development TRD Metal Badge Emblem..

This auto mirror folding relay kit is only compatible with the Toyota Innova Crysta 2016 And New Fortuner 2016 Onwards. After installing this relay kit your side mirror will be closed automatically whenever you lock the door and it will automatically open whenever the ignition is on in your car. You don't have to cut any wire during the installation, but you might be wiretapped that you have used for the connection to the central locking system.Vehicle Compatibility Toyota Cars.Toyota Innova Crysta 2016 Onwards.New Fortuner 2016 Onwards.Attention!: This product is only used if your Car model side mirror folds from the manual button inside.If your car does not have the button inside to fold and unfold the mirror so don't buy it.The side mirror should be electronic for using this relay.Car Rearview Mirror Folding Manual For Toyota. Operation:   1. Press the remote lock '.  mirror folding.   2. Press the remote to unlock the mirror opening1. Brief Installation of instruction Find out the original car mirror folder switch.Separate plug to original car switch, use product's male plug connects to switch plug and product's female plug connect to wrings group.According to the following picture connect the line.How to find out the center lock motor positive line):Searching the wire at the center motor wires group, use the 12V test pencil on one end to connect to Grand on the other end to touch the tested wire. Use the remote or key to press "lock". At the moment of the center motor locking the test pencil will flash, this wire is the center lock motor positive line. Use our product pink wire to connect to it.How to find out the center unlock motor positive line):Searching the wire at the center motor wires group, use the 12V test pencil on one end to connect to Grand.  The other end touches the tested wire. Use the remote or key to press "unlock. At the moment of center motor locking, the test pencil will flash, this wire Is the center unlock motor positive line Use our product gray wire to connect to it. * + 12V lineOff the car use the test pencil one end touches grand GND the other end touches the measuring line If the test pencil light this line is + 12V power line.User Instruction1. Finish installation. turn the engine ON, and make sure the original car mirror folding work normally.2. Turn off the engine. close door. press the remote then the side mirror fold automatically.3. Press the remote then the side mirror opens automatically.4. Turn the engine to ON side mirrors open automatically...

Easy To Install 5 Min Setup and quick wiring. easy to adjust the position and cut the perfect size to match your car. Strong Build Build with high-quality flexible and durable polyUrethane Material for long-term use. Water-Resistant High-Density Waterproof Material ensures your led spoiler is protected from Wind/ Rain/ Snow and the elements. Easy Installation: Step 1 Measure the length of your trunk from trunk edge to trunk edge. Trim the spoiler size. Step 2 Rub the mounting area with the 3M Primer and let dry for 45 seconds. Step 3 Press the spoiler on the mounting area. Power the LED spoiler and find your vehicle's corresponding wiring.After Installation: Compatibility:-For All Cars, Sales Package:-1 x LED universal spoiler Product Warranty:-1 Month..

Try this custom fit door side beading cladding for enhance your vehicle exterior look. It protect your Car from damage your Car body and scratches. made  with high quality ABS plastic material with silver coated  metallic silver paint finish with Car logo emblem.100% imported accessories for your car. double side adhesive tape is attached on the back side of each piece that make your installation job very easy.Installation - Installation is very easy for this product, you just have to paste it on the side door of the bottom side. before paste it make sure surface is properly clean and 100% dry. Do not wash Car minimum two days after install this product for 100% Result...

These mats are made by a very well-known brand GFX. Highly durable mats made with rubber and TPV material with perfect size according to vehicle model. These mats are 100% waterproof and protect the vehicle from, water, oil, dirt, and snow, moreover these mats also look very nice and decent in the car. Branded Product GFX Introduces the most advanced concept for car floor protection that gives a touch of class. These interior floor mats improvise all aspects of your car's - front, back, and side-foot space in an elegant manner. Long-Lasting Long-lasting floor mats also have anti-skid ridges on the underside of the GFX car floor mat to prevent from sliding inside the car, offering a splendid experience and safety to the driver and passengers. All Season All-season vehicle mats having deeply sculpted channels designed to trap water, road salt, mud, and sand. these mats have been designed and engineered to prevent curling and cracking in below O-degree celsius weather too! Car Interior Decoration Mode.Waterproof and Washable: The material used is waterproof and washable. You can wash the mat with soap and a soft cloth to keep it clean for long periods of time.Dust-free: Protects the floor space from dust, mud, snow, water and keeps your organized belongings safe and clean. Keeps the original carpet clean, safe, secure until you remove it to wash it.Odorless: This floor mat does not leave any smell and maintains the natural fragrance of the car intact.Black Color: To enhance the beauty of your car, black color is available which does right with every color of the car. The darkness maintains it for a long period of time until you get time to clean it. Customized fitting: To give a luxury style to your car, the floor mat gets a customized fitting as per the car's size and organizes your belongings to travel safely. Compatibility:-Toyota Fortuner 2016 Onwards. Sales Package:-Set of 4 GFX TPV Mats. Product Warranty:-1 Month Manufacturing Defect Warranty. FAQ:-Q. Is this mat is a universal type, can we fit it in any car model.Ans. No, These mats are 100% custom fit mats made according to the specific vehicle.Q. Are these mats are 100% waterproof mats.Ans. Yes, These mats are 100% waterproof, dustproof.Q. Are these mats cover the entire floor area.Ans. Yes, because of its raised edges it provides complete.Note:-Showing pictures only for a material and quality purpose only, because this is a custom fit product, Actual product will send you according to your car model year and variant for best fitting...

GFX Toyota Fortuner 2016 Onwards Finger Guard Bowl Chrome - 4 Pieces...

Window Car Door Visor Help to kept the window open in the light rain weather so that you can enjoy the rain. It also ensures that car window shields do not fog due to humidity. The door visor also prevents the direct sun rays on the side of the car. Apart from these Car Door Visors also enhance the exterior look of the car. The Door Visor also allows fresh air to naturally circulate through open windows while keeping the rain and wind out. Stylish Look Excellent design that enhances your car side profile look. Custom Fit Custom-fit design to ensure perfect fitting & size according to the specific vehicle model & brand. Comfort and Safety The door visor also deflects the wind, which reduces the noise outside of the car when you drive. Door Visor Easy Installation Step 1 Place the door visor on the window frame to check the position of pieces, before installation of door visor. Step 2 Clean and wipe properly apply surface area to make sure there was no dust, moisture, and water on the applied surface area. Step 3 Now remove the seal of the double-sided strong adhesive tape which is attached on the backside of every piece of the door visor. Step 4 Ensure accurate position, then press the product to make it tightly. Step 5 Do not wash your Car for 2-3 days after in material stacking window door visor. Step 6 You have all done now remove the blue-tinted wrapper from the chrome or silver line.   Compatibility:-For Toyota New Fortuner 2016 Onwards Sales Package:- Set of 4 Door Visor. Product Warranty:-1 Month Manufacturing Defect Warranty. Note:-Showing pictures only for a material and quality purposes only, because this is a custom-fit product, Actual product will send to you according to your car model year and variant for best fitting...

Clear Lens This iphcar projector fits 70% of the models, which is suitable for car better lighting and making your car high-end. Brightness Top Level Will not blind the oncoming vehicles, Be Safe Drive Safe with High-Quality Projector Lens. Original Product Easy to install, no damage to your car. Original iphcar has some original quality. Original iPH Projector Fog Light HousingHigh and low beam bi-xenon fog projector lights. Glass produced by curing system anti-scratching, anti-corrosion, fade-proof. High and low beam bi-xenon fog projector lights Two kinds of brackets for easy installations Top portion waterproof, because of high-selling Glass produced by curing system anti-scratching, anti-corrosion, fade-proofCompatibility:-Direct fit for all cars by Suzuki or similar cars. (eg. Swift, Baleno, Wagon-R, Alto new, Ignis, Ciaz, Ertiga, Brezza, S-cross, XL6, etc.)Direct fit for other cars with 3 inches round fog lamp (eg. Amaze, City, Figo, Aspire, Tiago, Tigor, Innova, Fortuner Nexon, Old Ecosport, Duster, Compass, Polo, Vento, WRV, etc. )For other cars, little alterations are required with the clamp to get it fitted. Installation: Professional installation recommendedDirect connection with the fog lamp wire coming from the master wiring harness.For high beam, the high beam/ solenoid wires to be connected with headlight high beam wires.Or you may use a separate switch for the fog lamp high beam.Insulate every connecting point properly to avoid any technical or physical damage.Carhatke will support with fitment as well. Compatibility:-Direct fit in most of the regular cars.Lens: 3.0 inches. Package Includes:-2 x iPH CAR Projector M612 2 x Brackets..

This rear pillar cluster led lights only compatible for toyota new fortuner models. built with super fine ABS plastic material. These lights directly stock on side of rear glass. lights have two functions one is brake light in bright red and normal red in parking. It adds a sporty look to your vehicle.Product SpecificationHigh glowing led reflector to add a sporty look to your car.Direct replacement original fitment.Water proof / shock proof / dust proof.High quality led's with superior quality.Prevents night time collisions...

For Lovers Enjoy the romantic atmosphere in your Car with your lover tonight. It appears infinite DIY colors with adjustable brightness/speed/pattern. App Control & 16 Million Colors The Car Interior Trim Light Strip uses a wireless “Lotus Lantern” APP for control suitable for IOS or Andriod. personalize the car interior space. Wireless RF Remote Wireless Music Remote Control enables you to change the color and adjust the brightness as you wish, also the Sound-activated Function allows you to enjoy the fun with the color changing. Light Mode:1) Sound Active Effects: The LED under car glow system is equipped with sound sensors that let the LED lights synchronized with the music beat. The LED music light strip follows the beat and adjusts flashing to fit the strength of the sound.2) Music Decoration: The Kit designed to be simple, yet also provides elegance inside the car when driving at night or enjoying music. And because it has a sound sensor, the under-car glow system synchronizes with the music beat.3) Fall Asleep Mode: The Led light will have fall asleep mode. This mode can automatically change dark brightness to provide a good sleep atmosphere.4) Brightness Color Temperature Adjustment: The LED is equipped with brightness color temperature adjustment mode. When you feel the light is dark, you can use this mode to change brightness. Easy Installation Step 1 Pass the optical fiber through the transparent tube. Put the transparent tube into the gap. Cut according to the length of the installation position. Step 2 Connect the optical fiber to the LED and tighten the screws.Hide wires and LEDs. Step 3 If apart car door: Hide it in the car door or center console and instrument panel. App Connection Steps: Step 1 Scan the QR code on the control box or search for “Lotus Lantern” in the app store. Step 2 Turn on your phone Bluetooth. Step 3 Open the APP and connect the light. Note:-1. If you face the issue of lights not connecting/working via the Bluetooth app, please troubleshoot with these two steps.2) Please open the APP and on the upper left corner, please click into the “Groups” Button (on the left of “Color” Button), there is a “Refresh” button, please click it and refresh the APP, and then it will show 1 device 1 connected. It means the connection is successful.3) If step 1 can’t solve the problem, please keep the Bluetooth and strip lights on and EXIT the APP, and then restart the APP "Lotus Lantern", and try to connect your phone again. Compatibility:-For All Cars, Sales Package:-5 in 1 RGB LED Strip Light Kit1 x Optic Fiber (236inch)1 x PVC Transparent Tube(236inch)1 x Remote Product Warranty:-1 Month..

Unique Design Attach it to your car's rearview mirror. Great decoration for your car. luxury Finish Crystal bling interior decoration giving you and your car a unique fashionable. Best Gift This car perfume pendant will be an amazing choice for the gift of any car lover and driver. Original Car Rearview Mirror Metal Tassel and Crystal Inlay Logo Pendant Hanging Freshener2 in 1 Car Air Freshener- you could not find one like ours! it is not only a Car Air Freshener but also a beautiful Car Rearview Mirror Pendant. Surprise, let our friends envy your new discovery! Transparent and non-fragile glass bottle and adjustable chain, metal tassel and crystal inlays, built-in car logo design, Crystal bling interior decoration giving you and your car a unique look. This car pendant is not only a beautiful decoration for a car or your home, but also can as a car air freshener, it can remove odor after just fill in essential oil, Exquisite design, high-end gift box packaging, suitable for a gift to family and friends on birthday, Valentine's Day, Christmas Day, Thanksgiving, Father's Day, Mother's Day, etc.Note: we will send a random color Freshener.Easy Installation Step 1 Open The Lid. Step 2 Add The Perfume. Step 3 Close The Lid. Compatibility:-For All Cars, Sales Package:-1 x Pendant1 x Straw1 x Perfume Bottle (15ml) Logos:-VolkswagenMercedesSuzukiNissanHyundaiAudiBMWToyotaHondaKiaFordChevrolet..

The combo of iPH Projector with CrystalEye 120w led that outperforms the stock headlights of the car. These fog lights come with high & low beam functions and are meant for those people who are looking for high-intensity lighting without affecting the visibility of oncoming drivers. Your search for the best intensity yet road legal fog lights ends here.Life Span of iPH CAR Projector Fog Lamp:Crystal Eye 120w Led is used in iPHCAR 3.0-inch Bi-Xenon Projector Fog Lamp, hence, it can deliver better performance for approx. 3 to 4 years, on driving 3-5 hours every day.About the Projector:Brand: iPHCAR, a well-known brand globallyMaterial: Shockproof Metal Housing for better lifespanQuality: Waterproof, Shockproof, DurableLens Size: 3.0 inch.About 120W Led inside:Crystal Eye 120W Super Power LedComes with 120watts fast bright.Low voltage protection,Compatibility:Direct fit for all Cars by Suzuki or similar cars. (eg. Swift, Baleno, Wagon-R, Alto new, Ignis, Ciaz, Ertiga, Brezza, S-cross, XL6,  Celerio, Alto 800 etc.)Direct fit for other cars with 3 inches round fog lamp (eg. Ford Figo, Ecosport, Nexon, Compass, Amaze, Etios, City, Duster, etc. )For other cars, little alterations required with the clamp to get it fitted.Carhatke will support with fitment as well.Installation:Professional installation recommendedDirect connection with the fog lamp wire coming from the master wiring harness.For high beam, the high beam/ solenoid wires to be connected with headlight high beam wires.Or you may use a separate switch for the fog lamp high beam.Insulate every connecting point properly to avoid any technical or physical damage.Package Includes:2 x iPHCAR Projector Fog Lamp2 x CrystalEye 120w Led Bulbs2 x Brackets2 x BallastsMounting ScrewsFog Light Wiring Kits & Couplers (Addon)Warranty:Crystal Eye Led Comes with 15 MonthsNote:1. If you want to keep the Wiring of this kit Separate from the Car’s electricals, simply use the Kit with Relay Harness...

Original NightEye 100% Original NightEye Bulb with company warranty, in the market some website selling fake nighteye bulb. Great Visibility  Double ball fan can reach 12000rpm which 20 times fast in heat dissipation than general products to solve high heating issues to reduce luminous decay, prolong life-span. Waterproof Water Test to prove the manufacturing quality, you can put the LED bulb into the water and the LED light will keep lighting. Dual Heat Dissipation System All in one aluminum headlamp body combined with two ball fans which with 12,000 RPM the heat dissipation effect is 20 times than normal product. NIGHTEYE LED Headlights to keep the headlamps in good condition, not any broadcast radio interference allows the correct beam pattern. All in one Driver with the smaller size, one-step installation with original car lamp connector America Bridgelux LED Chips Imported COB lighting source low power consuming, Long life-span and Powerful anti-static performance Led Specs:-Save Power: Consumers Only 72 WattsColor: 6500K Cool WhiteLED: Bridgelux COBVoltage: DC 9V-32VCertifications: IP68 Waterproof, RoHSBeam Angle: 360Fan: Dual 12,000 RPM Two Ball Fan Quick Specs:-Long Span LifeInstant StartHighest Light EfficiencyRain ResistantLow BeamHigh BeamImported COBAmerican Chips LED Compatible:-H7HB3HB3 9005H8/H11H4H27HB4 9006H1HB4 Socket Types:-H1, H3, H4, H7, H8, H11,9004, HB3, 9005, HB4,9006, 9007 Sales Package:-2x Light BulbsManual BookWarranty Card Product Warranty:-1 Year Warranty By Carhatke.comWarranty:1-year complete replacement warranty by carhatke.com if you facing any issue, nighteye is an imported product so nighteye did not provide any warranty in India but carhatke provide 1-year warranty if you facing any issue with led bulb just call us on our register contact number and we will replace your bulb within 3-7 Days. Amazon and Flipkart did not provide after-sale service if your bulb not working, but carhatke provides a 1-year warranty from our end...