Toyota Fortuner 2021 Accessories

This auto mirror folding relay kit is only compatible with the Toyota Innova Crysta 2016 And New Fortuner 2016 Onwards. After installing this relay kit your side mirror will be closed automatically whenever you lock the door and it will automatically open whenever the ignition is on in your car. You don't have to cut any wire during the installation, but you might be wiretapped that you have used for the connection to the central locking system.Vehicle Compatibility Toyota Cars.Toyota Innova Crysta 2016 Onwards.New Fortuner 2016 Onwards.Attention!: This product is only used if your Car model side mirror folds from the manual button inside.If your car does not have the button inside to fold and unfold the mirror so don't buy it.The side mirror should be electronic for using this relay.Car Rearview Mirror Folding Manual For Toyota. Operation:   1. Press the remote lock '.  mirror folding.   2. Press the remote to unlock the mirror opening1. Brief Installation of instruction Find out the original car mirror folder switch.Separate plug to original car switch, use product's male plug connects to switch plug and product's female plug connect to wrings group.According to the following picture connect the line.How to find out the center lock motor positive line):Searching the wire at the center motor wires group, use the 12V test pencil on one end to connect to Grand on the other end to touch the tested wire. Use the remote or key to press "lock". At the moment of the center motor locking the test pencil will flash, this wire is the center lock motor positive line. Use our product pink wire to connect to it.How to find out the center unlock motor positive line):Searching the wire at the center motor wires group, use the 12V test pencil on one end to connect to Grand.  The other end touches the tested wire. Use the remote or key to press "unlock. At the moment of center motor locking, the test pencil will flash, this wire Is the center unlock motor positive line Use our product gray wire to connect to it. * + 12V lineOff the car use the test pencil one end touches grand GND the other end touches the measuring line If the test pencil light this line is + 12V power line.User Instruction1. Finish installation. turn the engine ON, and make sure the original car mirror folding work normally.2. Turn off the engine. close door. press the remote then the side mirror fold automatically.3. Press the remote then the side mirror opens automatically.4. Turn the engine to ON side mirrors open automatically...

Optimize for All Cars The luminous point and the position of the chuck are the same height as the halogen lamp, perfect replacement. Great Visibility Adopting car-grade G-XP chip, 360-degree light emission, without any dark spots and blind areas, making driving safer. Minimization The Temperature Water Test to prove the manufacturing quality, you can put the LED bulb into the water and the LED light will keep lighting. Dual Heat Dissipation System The bulb is equipped with a fan, heat sink, liquid cooling tube, multiple heat dissipation, extend the life more 30,000 hours. Hydraulic Control Built-in decoding chip, greatly reducing the problem of flicker, error message and radio interference. Advanced Cooling Fan Imported COB lighting source low power consuming, Long life-span and Powerful anti-static performance If you expect a quality LED headlight bulb that is combined with high-quality, super brightness of 130 Watts and efficient heat dissipation, if you are worried about the error code when installing the bulb. Featuring with its outstanding triple cooling system and a high number of 130W 13,600LM . Carhatke LED headlight bulb provides you with a brighter light, better heat dissipation, longer lifespan and 99% compatibility. Canbus-Ready Design With an upgraded intelligent Canbus design, This Carhatke LED bulb is compatible with 99% of vehicles with no radio interference, no flicking or error code, preventing over-voltage and over-current protection function. Perfect Light Beam Pattern The flip chip inside the LED car bulb is perfectly positioned to fix the housing in the correct spot. This ensures the best light beam pattern with a perfect 45°cut-off line for low beam and super focused light for high beam. You can also rotate the light beam pattern with a 360°retainer. There’s no dark spot, no issue with blinding oncoming traffic. Quick Specs:-Save Power: Consumers Only 130 Watts(65 Each)Color: 6000K Cool WhiteOperating Life: >30000hrsOperating Temperature: -40C ~+90CInput Power: 130W +10%Operating Voltage: DC 12-24VLuminous Flux: 13600LMIP Rate: IP68Light Source Model: G-XP x3 CustomizedHeat Dissipation: Aviation Aluminum 6063+Red copper+ Dual Heat Coducting Tubes Wiring Diagram:-Long Span LifeInstant StartHighest Light EfficiencyRain ResistantLow BeamHigh BeamImported COB Sales Package:-H1H4H19H7H8/H11/H16H27/880/881HB4/9006HB3/90059012 Socket Types:-H7 Sales Package:-2x Light Bulbs Product Warranty:-1 Year Warranty By Carhatke.com Warranty:1 Year complete replacement warranty by carhatke.com if you are facing any issues with the led bulb just call us on our registered contact number and we will replace your bulb within 7 Days...

Car chrome door handles come in some high and luxury car models. Not every car maker company gives you chrome handles in their car model because of its cost factor. They keep handles in body color paint or plain black without body color, if it is affecting your car look and you are getting bored with them, then you should add some styling material to your car exterior look. These chrome handles make very a big difference in your car's exterior look, they add a classy bold metallic look to your vehicle. installation is very simple for these chrome handle covers, you can install them by yourself. double side adhesive tape is attached to every piece.Also Compatible For: Fortuner 2016-20/ Fortuner 2021 Onwards/ Cysta 2016-2020/ Crysta 2021 Onwards/ Yaris 2018 Onwards.Note: These chrome handles are compatible with Fortuner 2016 Onwards in 1 keyhole handle model...

Legender Logo Chrome 3D Letter Emblem Full Set in High Quality ABS Material..

These mats are made by a very well-known brand GFX. Highly durable mats made with rubber and TPV material with perfect size according to vehicle model. These mats are 100% waterproof and protect the vehicle from, water, oil, dirt, and snow, moreover these mats also look very nice and decent in the car. Branded Product GFX Introduces the most advanced concept for car floor protection that gives a touch of class. These interior floor mats improvise all aspects of your car's - front, back, and side-foot space in an elegant manner. Long-Lasting Long-lasting floor mats also have anti-skid ridges on the underside of the GFX car floor mat to prevent from sliding inside the car, offering a splendid experience and safety to the driver and passengers. All Season All-season vehicle mats having deeply sculpted channels designed to trap water, road salt, mud, and sand. these mats have been designed and engineered to prevent curling and cracking in below O-degree celsius weather too! Car Interior Decoration Mode.Waterproof and Washable: The material used is waterproof and washable. You can wash the mat with soap and a soft cloth to keep it clean for long periods of time.Dust-free: Protects the floor space from dust, mud, snow, water and keeps your organized belongings safe and clean. Keeps the original carpet clean, safe, secure until you remove it to wash it.Odorless: This floor mat does not leave any smell and maintains the natural fragrance of the car intact.Black Color: To enhance the beauty of your car, black color is available which does right with every color of the car. The darkness maintains it for a long period of time until you get time to clean it. Customized fitting: To give a luxury style to your car, the floor mat gets a customized fitting as per the car's size and organizes your belongings to travel safely. Compatibility:-Toyota Fortuner 2016 Onwards. Sales Package:-Set of 4 GFX TPV Mats. Product Warranty:-1 Month Manufacturing Defect Warranty. FAQ:-Q. Is this mat is a universal type, can we fit it in any car model.Ans. No, These mats are 100% custom fit mats made according to the specific vehicle.Q. Are these mats are 100% waterproof mats.Ans. Yes, These mats are 100% waterproof, dustproof.Q. Are these mats cover the entire floor area.Ans. Yes, because of its raised edges it provides complete.Note:-Showing pictures only for a material and quality purpose only, because this is a custom fit product, Actual product will send you according to your car model year and variant for best fitting...

..

The high-definition blue lens on side mirror has an anti-glare effect, providing clear reflection even in the presence of strong light from behind, leading to safer driving...

The touch will change to the light and the 7-color light will automatically convert it. The K9 crystal three-dimensional multi-faceted cutting technology makes the material hard and wear-resistant.Built-in long efficient rechargeable battery (can be charged for about 20 days at a time). To install, simply twist, loosen and remove the shift knob and replace it...

Fragrances are very important for us to keep our mind fresh and it has a great impact on our comfort in our car, home, and office. Areon Car spray perfume Blue a good choice to keep your Car fresh inside and provide a long lasting fragrance results. It designs to keep the environment fresh for a long time. you can spray this perfume in your home area, office as well as in your car. make your place pleasant clear air from the odor...

170° Universal OE Fitment Type Rear Number Plate Camera with AHD Picture Quality and Dynamic Guidelines 170° Universal OE Fitment Type Rear Number Plate Camera with AHD Picture Quality & Dynamic Guidelines BC DH4.4 AHD (OE Fitment Type Rear Number Plate Camera) is equipped with high end 1/3" CMOS colour sensor and is Element Ready. It is designed to withstand extreme weather conditions. It consumes very little power due to the design and use of modern circuitry inside. It has Moving Guidelines. C-MOS Sensor A CMOS sensor is an electronic chip that converts photons to electrons for digital processing. BC DH4.4 AHD incorporates a highly efficient colour sensor and modern electronics, reducing power consumption. This reverse parking camera can be installed in any Car for reverse parking. camera supports all kinds of stereo for the rearview video.. if you are thinking about what size should i drill or how can match the radius of the camera for correct size drilling then don't worry about that camera comes with an included drill blade. Compatibility:-1280(H) x 720(V) Minimum Resolution Display General Specifications:-Power Supply: DC12V±3V Video System: AHD Current Consumption: 50mA Optical Format: 1/3 Image Sensor: CMOS lens Effective Pixels: 1280(H) x 720(V) 25fps Video Signal: 1.0 Vp-p / 75ohm Lens Angle: 170° (D), 110° (H),100° (V) Electronic Shutter: 1/60 ~ 1/100000 sec White Balance: AutoHumidity: up to 90%Water Resistant: IP67 Illumination Min.: 0.01Lux Operating Temperature: -20°C ~ +70°C Product Warranty:-1-Year Manufacturing Defect Warranty...

When it comes to keeping your car's interior clean, comfortable, and stylish, Carhatke's 7D Mats are a popular choice among automotive enthusiasts and everyday drivers alike. These mats offer a level of protection and aesthetic enhancement that goes beyond traditional floor mats. Let's explore what makes Carhatke 7D Mats a sought-after accessory for car owners. Superior Design and Fit Carhatke 7D Mats are meticulously designed to fit your specific car model perfectly. They are custom-made to match the contours and dimensions of your car's floor, ensuring complete coverage and protection. This tailored fit prevents dirt, dust, and moisture from seeping underneath the mats, safeguarding your car's floor from stains and damage. Exceptional Material Quality These mats are crafted from high-quality, durable materials. They are typically made from a combination of thermoplastic elastomers (TPE) and polyvinyl chloride (PVC) to ensure resilience against wear and tear. The robust construction of Carhatke 7D Mats allows them to withstand daily use, including exposure to mud, water, and spilt liquids. Deep Grooves and Ridges One of the standout features of Carhatke 7D Mats is their deep grooves and ridges. These channels are strategically designed to trap dirt, debris, and moisture effectively. Even if you accidentally spill liquids or step into your car with muddy shoes, the mats keep these elements contained, making it easy to clean and maintain your car's interior. Anti-Skid Backing Safety is a top priority in any vehicle, and Carhatke understands that. These mats come with an anti-skid backing that ensures they stay firmly in place, preventing any slippage during sudden stops or accelerations.  Easy to Clean You can simply remove the mats from your car, shake off loose dirt, and then wipe them clean with a damp cloth or hose them down if needed. The mats dry quickly, so they'll be ready to protect your car's interior in no time. Longevity and Warranty: Investing in Carhatke 7D Mats is an investment in the long-term well-being of your car's interior. These mats are built to last and are often backed by a warranty, giving you peace of mind that you're making a quality purchase. Carhatke 7D Mats are more than just floor mats; they are a comprehensive solution to protect, enhance, and style your car's interior. With their custom fit, durability, easy maintenance, and aesthetic appeal, these mats are an excellent choice for anyone looking to elevate their driving experience and keep their car's interior in pristine condition. So, whether you're a daily commuter or an automotive enthusiast, consider Carhatke 7D Mats to provide the best in interior protection and style for your vehicle. Compatibility:-Toyota Fortuner 2016 Onwards Sales Package:-2 Pcs for First Row1 Pcs for Second Row1 Pcs for Boot mat Product Warranty:-2 Year-limited manufacturing defect warranty only. Any physical damage will not be covered in the warranty. Note: Showing pictures only for material and quality purposes only, because this is a custom fit product, The Actual product will be sent to you according to your car model year and variant for best fitting...

Easy To Install 5 Min Setup and quick wiring. easy to adjust the position and cut the perfect size to match your car. Strong Build Build with high-quality flexible and durable polyUrethane Material for long-term use. Water-Resistant High-Density Waterproof Material ensures your led spoiler is protected from Wind/ Rain/ Snow and the elements. Easy Installation: Step 1 Measure the length of your trunk from trunk edge to trunk edge. Trim the spoiler size. Step 2 Rub the mounting area with the 3M Primer and let dry for 45 seconds. Step 3 Press the spoiler on the mounting area. Power the LED spoiler and find your vehicle's corresponding wiring.After Installation: Compatibility:-For All Cars, Sales Package:-1 x LED universal spoiler Product Warranty:-1 Month..

..

..

Try this custom fit door side beading cladding for enhance your vehicle exterior look. It protect your Car from damage your Car body and scratches. made  with high quality ABS plastic material with silver coated  metallic silver paint finish with Car logo emblem.100% imported accessories for your car. double side adhesive tape is attached on the back side of each piece that make your installation job very easy.Installation - Installation is very easy for this product, you just have to paste it on the side door of the bottom side. before paste it make sure surface is properly clean and 100% dry. Do not wash Car minimum two days after install this product for 100% Result...

GFX Toyota Fortuner 2016 Onwards Finger Guard Bowl Chrome - 4 Pieces...

Window Car Door Visor Help to kept the window open in the light rain weather so that you can enjoy the rain. It also ensures that car window shields do not fog due to humidity. The door visor also prevents the direct sun rays on the side of the car. Apart from these Car Door Visors also enhance the exterior look of the car. The Door Visor also allows fresh air to naturally circulate through open windows while keeping the rain and wind out. Stylish Look Excellent design that enhances your car side profile look. Custom Fit Custom-fit design to ensure perfect fitting & size according to the specific vehicle model & brand. Comfort and Safety The door visor also deflects the wind, which reduces the noise outside of the car when you drive. Door Visor Easy Installation Step 1 Place the door visor on the window frame to check the position of pieces, before installation of door visor. Step 2 Clean and wipe properly apply surface area to make sure there was no dust, moisture, and water on the applied surface area. Step 3 Now remove the seal of the double-sided strong adhesive tape which is attached on the backside of every piece of the door visor. Step 4 Ensure accurate position, then press the product to make it tightly. Step 5 Do not wash your Car for 2-3 days after in material stacking window door visor. Step 6 You have all done now remove the blue-tinted wrapper from the chrome or silver line.   Compatibility:-For Toyota New Fortuner 2016 Onwards Sales Package:- Set of 4 Door Visor. Product Warranty:-1 Month Manufacturing Defect Warranty. Note:-Showing pictures only for a material and quality purposes only, because this is a custom-fit product, Actual product will send to you according to your car model year and variant for best fitting...

Clear Lens This iphcar projector fits 70% of the models, which is suitable for car better lighting and making your car high-end. Brightness Top Level Will not blind the oncoming vehicles, Be Safe Drive Safe with High-Quality Projector Lens. Original Product Easy to install, no damage to your car. Original iphcar has some original quality. Original iPH Projector Fog Light HousingHigh and low beam bi-xenon fog projector lights. Glass produced by a curing system anti-scratching, anti-corrosion, and fade-proof. High and low beam bi-xenon fog projector lights Two kinds of brackets for easy installations Top portion waterproof, because of high-selling Glass produced by curing system anti-scratching, anti-corrosion, fade-proof Installation: Professional installation recommendedDirect connection with the fog lamp wire coming from the master wiring harness.For high beams, the high beam/ solenoid wires are to be connected with headlight high beam wires.Or you may use a separate switch for the fog lamp's high beam.Insulate every connecting point properly to avoid any technical or physical damage.Carhatke will support with fitment as well. Compatibility:-Lens: 2.5 inches. Package Includes:-2 x iPH CAR Projector M611 2 x Brackets..